search

ButterFlight / butterflight-configurator

GNU General Public License v3.0
55 stars 19 forks source link

Stage 2 and lowpass gyro filter options not showing #36

Open GerardMatthews opened 6 years ago

GerardMatthews commented 6 years ago

On configurator 10.4.1 the filter options do not show if you already have expert mode enabled. If you then disable and re-enable them the stage 2 filter shows but still not the low pass filter option. Please see screenshots showing problem.

I have BF 3.5 installed on the quad with fast kalman enabled already.

screenshot_1

After disabling and then re-enabling I can see the stage 2 filter options.

image

christianv2m commented 6 years ago

Yep, happens the same to me. Looks like the problem is when you have set in configuration "Permanently enable expert mode".

ghost commented 6 years ago

On configurator 10.4.2 i cant see stage2 filter . In was able to ser on 10.4.1 but always show nome. Even after Change it to kalman (default) and save it, after reboot ThE configurator always show none.

LexioTech commented 6 years ago

@nefer84 Are you running a Helio board?

ghost commented 6 years ago

@LexioTech yes um.using helio board

LexioTech commented 6 years ago

@nefer84 Those filtering options were removed from the configurator in case of Helio boards. You can edit the built in imuf settings on the filters tab though. You might need to upgrade to the latest rc version fw for that.

ghost commented 6 years ago

@LexioTech thank you. What about other boards, stage2 on filter tab always show none.