search

ButterFlight / butterflight

GNU General Public License v3.0
106 stars 26 forks source link

Issue with 3.5.1 SP Racing F3 Brushed Boards. Fixed #146

Closed jmc007 closed 6 years ago

jmc007 commented 6 years ago

If your issue looks like a hardware fault or a configuration problem please don't raise an issue here.

Please consider using other user support options such as asking the manufacturer of the hardware you are using, RCGroups: https://rcgroups.com/forums/showthread.php?t=2464844, or Slack: https://slack.betaflight.tech or other user support forums & groups (e.g. facebook).

If you believe there is an issue with the firmware itself please follow these steps:

  1. Describe your problem;
  2. Include ways to reproduce the problem;
  3. Provide information about your flightcontroller and other components including how they are connected/wired;
  4. Add the used configuration and firmware version;
  5. Create a diff and post it here in a code block. Put `` (three backticks) at the start and end of thediff` block (instructions on how to do a diff: https://oscarliang.com/use-diff-not-dump-betaflight/); and
  6. Remove this Text :).
jmc007 commented 6 years ago

Flashes the boards fine, then on connecting, the screen flashes and Butterflight fails to connect. All known ways to fix SP Racing F3 boards are failing.

One board was the Queen F3 Brushed, the other Furibee F3 32 brushed.

jmc007 commented 6 years ago

Both were flashed with Butterflight 3.5.1 [SP Racing F3]

Managed to flash back to Betaflight with Flash loader, then tried Butterflight 3.5.0 and all good.