BF 3.5.1 (RC2) freezes F4 CPU on OmnibusF4 corner by CLI command

[jstremmler]

BF 3.5.1 (RC2) freezes F4 CPU on OmnibusF4 corner by CLI command.....

If I simply key in: "STATUS" as a CLI command the F4 CPU freezes and board has to be unpowered and rebooted again.

This is not a hardware issue because it works with 3.5.0

[adrianmiriuta]

@jstremmler use Butterflight 3.5.1 [ Release Candidate ] it's fixed there

[itachi1983]

Same problem with omnibusf4FW 3.5.1 rc2, no issue with betaflight.

[adrianmiriuta]

@jstremmler @itachi1983 try this butterflight_3.5.1_OMNIBUSF4SD.hex.zip

[itachi1983]

But my fc is an airbot fireworks v2 , firmware is omnibusf4FW not SD

[adrianmiriuta]

@itachi1983 butterflight_3.5.1_OMNIBUSF4FW.hex.zip

[itachi1983]

Solved cli problem but no oSD in configurator

[itachi1983]

My foult problem seems solved cli commamds work and oSD too. Thanks

[adrianmiriuta]

@itachi1983 sorry You have to wait for next release ! I fly LOS and have dropped the OSD out, because it fucks up the gyro data on this board the SPI3 is overloaded

[orneryd]

is this merged into master @adrianmiriuta ?

[adrianmiriuta]

@orneryd no.

[adrianmiriuta]

@orneryd you can close this it is merged in odin