Red LED start and keeps blinking after APM boot / no ESC response

CCAZE31 / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega

0 stars 0 forks source link

Red LED start and keeps blinking after APM boot / no ESC response #913

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago

Why do my ESC's not arm?

1.Connect via USB or LiPo
2.APM 2.5 boots (red/blue LED's blinking fast)
3.The red light blinks (slow)
4.ESCs do not arm (no beep)

If i connect the LiPo directly to the PDB, all ESC's work fine. Calibrating 
them directly with RC also works well.

APM 2.5
3DR Arducopter Hexa V2.9.1bSpektrum DX6i RC COntroller and AR6210X Receiver

Original issue reported on code.google.com by fnef...@gmail.com on 4 May 2013 at 4:54

GoogleCodeExporter commented 8 years ago

main battery may be low. I've also had problems with arming in arducopter 3

Original comment by drjohnco...@gmail.com on 18 Jun 2013 at 7:13

GoogleCodeExporter commented 8 years ago

[resolved]
- the blinking red light was the "no-gps" indicator, because i were indoors
- the ESC's did not arm because the 3DR power module was broken => after i 
replaced it, everything works well

Original comment by fnef...@gmail.com on 25 Jun 2013 at 1:14