search

CCHS-Melbourne / dingo-cap

Donkey-Hat is a Raspberry Pi Hat to drive a Donkey Car (http://www.donkeycar.com/)
0 stars 1 forks source link

Edge.Cut drawings for Dingo-Hat #1

Closed PancakeLegend closed 4 years ago

PancakeLegend commented 4 years ago

Raspberry Pi have DXFs available of their boards.

https://www.raspberrypi.org/documentation/hardware/raspberrypi/mechanical/README.md

The Pi 4 layout is all on a 0.05mm grid.

I've made Edge.Cuts and Dwgs.User DXFs (the latter includes the headers and mount hole positions) directly from their drawings. If you import them into KiCAD with at 0,0 onto the appropriate layers everything should align.

rdpowers commented 4 years ago

Dingo hat changes are on branch dingo-hat. Can you resubmit to that branch for clarity? Thanks!

PancakeLegend commented 4 years ago

It appears that I cannot. I'll look into it.

rdpowers commented 4 years ago

Oh, right, sorry to be difficult. I'll also look in to it, but considering I'm sort of the worst person for this job, I wouldn't rely on that. Thanks!

On Tue, Oct 15, 2019 at 9:37 AM PancakeLegend notifications@github.com wrote:

It appears that I cannot. I'll look into it.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/CCHS-Melbourne/donkey-hat/pull/1?email_source=notifications&email_token=AAMOPB2ICZGB6NX6JIETL2DQOTYBBA5CNFSM4JAJVB5KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEBG2YMI#issuecomment-541961265, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAMOPBZC6LXLX7GTSLUZJ6LQOTYBBANCNFSM4JAJVB5A .