search

CCHS-Melbourne / dingo-cap

Donkey-Hat is a Raspberry Pi Hat to drive a Donkey Car (http://www.donkeycar.com/)
0 stars 1 forks source link

OLED and MPU placement #10

Closed mage0r closed 4 years ago

mage0r commented 4 years ago

We had several options discussed here and we may need to try a few out:

  1. Mount the OLED where the MPU is currently and mount the MPU underneath. This will reduce our vertical space underneath and may need to work around heat-sinks.
  2. Maintain the MPU position and utilise a short cable for the OLED. More flexibility, but also more things that can go wrong.
  3. Maintain the MPU position and move the OLED position to free up access to the camera cable slot. Current footer is back to front. Barrel jack position is crucial and there may simply be not enough room.
mage0r commented 4 years ago

We appear to be able to have them both on the front, as long as we're careful with positioning.

mage0r commented 4 years ago

Closing this in favour of #15 and possibly 522ffcd9912a467c827c6267047b75df5bd68a04