CCHS-Melbourne iotuz-esp32-hardware issues

CCHS-Melbourne / iotuz-esp32-hardware

Project for the InternetOfTuz (LCA2017 Open Hardware Mini-Conference)

Other

34 stars 15 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

ESPHome configuration

#71 jasonblewis closed 2 years ago
0
updated IoTuz firmware reference

#70 marcmerlin closed 7 years ago
0
BME280 placement causes temp readings 10C too high due to chip placement?

#69 marcmerlin opened 7 years ago
3
flashing over gives CRC errors that will not go away unless entire board is power cycled, or LCD power is removed

#68 marcmerlin opened 7 years ago
2
Pins 37/38 are unused, high res input only, use one of them for battery and free up GPIO2

#67 marcmerlin closed 7 years ago
2
move LCD backlight control to direct I/O pin

#66 marcmerlin opened 7 years ago
0
Added links to my arduino driver.

#65 marcmerlin closed 7 years ago
0
Added rotary encoder test and support in breakout.

#64 marcmerlin closed 7 years ago
0
Added 3 Binaryencoder

#63 marcmerlin closed 7 years ago
2
Fulldemo

#62 marcmerlin closed 7 years ago
0
Fulldemo

#61 marcmerlin closed 7 years ago
0
Added new demo to select LED color from sliding color scale.

#60 marcmerlin closed 7 years ago
1
Add STLs for v1.0 of a 3D-printable case

#59 thaytan closed 7 years ago
0
Overhang on USB

#58 rdpowers opened 7 years ago
0
Bulk Caps

#57 rdpowers opened 7 years ago
0
Tuz logo attribution/removal

#56 rdpowers opened 7 years ago
0
Samples/fulldemo: Move enum into separate header.

#55 thaytan closed 7 years ago
0
Fulldemo

#54 marcmerlin closed 7 years ago
0
io expander is listed as having 2 IO ports on the back of the board

#53 marcmerlin closed 7 years ago
2
LDO thermal can be embiggened.

#52 rdpowers opened 7 years ago
0
Board doesn't turn on with power-only USB

#51 ghost opened 7 years ago
1
Missing Mic

#50 PeteLawler opened 7 years ago
1
New demo

#49 marcmerlin closed 7 years ago
0
Fix MISO pinmode, add comments

#48 marcmerlin closed 7 years ago
0
I2C expander pin mapping on back of the board is wrong

#47 marcmerlin opened 7 years ago
1
Are APA106 LEDs missing recommended cap? Has anyone gotten them to work?

#46 marcmerlin opened 7 years ago
3
Add help for compilation error with old adafruit library

#45 marcmerlin closed 7 years ago
0
Adafruit_ILI9341.cpp doesn't work without patch

#44 marcmerlin closed 7 years ago
6
Added notes about buttons and battery holder

#43 jonoxer closed 7 years ago
0
Recess IR LED

#42 mage0r opened 7 years ago
0
MCP6002 Pinout Wrrrrrong.

#41 rdpowers opened 7 years ago
0
Fuse from assembly house was not good. Very not good.

#40 rdpowers opened 7 years ago
0
Pull-up On IO0?

#39 rdpowers opened 7 years ago
0
Bevel alligator connector

#38 rdpowers opened 7 years ago
0
Cutout

#37 rdpowers opened 7 years ago
0
Mod box, QC

#36 rdpowers opened 7 years ago
0
Missing Assembly BOM Items

#35 rdpowers opened 7 years ago
0
i2s Impedance Matching?

#34 rdpowers opened 7 years ago
0
i2c Pull-up Values

#33 rdpowers opened 7 years ago
1
EN needs pullup.

#32 rdpowers opened 7 years ago
0
PDF of schematic

#31 mage0r closed 7 years ago
0
X & Y Pinout on Joystick Reversed

#30 rdpowers opened 7 years ago
4
Reset after programming

#29 rdpowers closed 7 years ago
2
Reset Button

#28 rdpowers opened 7 years ago
1
Pinout Error on MK91 - Microphone

#27 rdpowers opened 7 years ago
0
Solder mask on back of alligator clips

#26 mage0r closed 7 years ago
1
i2c Addresses To Overlay

#25 rdpowers closed 7 years ago
1
Incorrect BOM item for 1nF cap - 0201 not 0603

#24 rdpowers closed 7 years ago
0
Via stitching removed on LDO by accident

#23 rdpowers closed 7 years ago
0
Move buttons B & A

#22 rdpowers closed 7 years ago
2