search

CIRCL / Circlean

USB key cleaner
https://www.circl.lu/projects/CIRCLean/
BSD 3-Clause "New" or "Revised" License
444 stars 69 forks source link

Supported Raspberry Pi models? #70

Open MichaelKofler opened 4 years ago

MichaelKofler commented 4 years ago

Which models does Circlean support? I did some tests:

Is this to expected? Are there any plans to provide an updated image for new RPi models?

Thank you!

Rafiot commented 4 years ago

Hmmmm I expected it to work on the 3B+, but I don't have one to test with, so I'll trust you on that.

And same, but more expected, for the 4B. I need to get one of these and figure out what's going on.

And when I figure it out, I'll release a new image/new images.

MichaelKofler commented 4 years ago

4B probably only boots with new firmware and kernel files of a current Raspbian image.

3B+ fails to correctly recognize the USB sticks. I have attached a photo.

IMG_20190723_103450

Rafiot commented 4 years ago

Right, I see, someone else reported having a similar issue.

The USB key not being recognized is weird, and I'll need to get my hand on the right version of the device.

chooka888 commented 4 years ago

I used the pre-built img from CIRCLean. I tested RPI 1 B+ and RPI 2B. I got the same error as Michael's 3B+ - "Error: could not determine real path of the device: No such file or directory"

Rafiot commented 4 years ago

Just to make sure: where are the two USB keys plugged? The source key should be in the top left slot, and the destination in the bottom right one.

We released a new image last week, and it is working on rPi4.

chooka888 commented 4 years ago

I had the keys plugged in as you described.

Rafiot commented 4 years ago

This is annoying, I have no idea what is going wrong here... Which image are you using? And I see the destination key isn't found on the screenshot, is this key mountable on an other device? And what is the filesystem format?

chooka888 commented 4 years ago

I used the img - 2019-08-30_CIRCLean.img Both keys are formatted as FAT32 and mount fine on my Mint desktop.

lss662 commented 4 years ago

I am using the 2020-01-16_CIRCLean.img, but I am having issuse on a RPi 4B. Source key in the top left and destination in one of the others. Looks like it can't find the source key. I've tried it with both usb keys and usb disks.

20200312_101826

Rafiot commented 4 years ago

What is the file system of the devices you try to mount?

lss662 commented 4 years ago

FAT32. 32GB Integral USB 3.0 flash drive just unpacked. Two of them.

Pintu116 commented 9 months ago

What is the file system of the devices you try to mount?

brother I'm using this project for my finale year project so can you provide the latest pre-build img for the project and mention the supported devices!!

an-140 commented 2 months ago

I am also looking for a fresh img needed for security needs