Closed jmrush97 closed 1 year ago
The ct clamp figures not be converted correctly. For example: CT 1 Internal Load 0W CT 2 Grid 122W CT 3 Generation -25W CT 4 None 0W CT 5 None 0W CT 6 None 0W
Supply voltage: 231.3V frequency: 49.94Hz Power: Grid : 115W Generated : -25W
at that time the generation figure was 2.5kw, house consumtiption was 2.5kw and grid 0.1kw.
Is your ME system correctly configured because the CT values I get are correct.
Also what device (Harvi or Eddi or Zappi) are your CT’s wired to?
Re-open if still an issue, probably just misconfigured though?
The ct clamp figures not be converted correctly. For example: CT 1 Internal Load 0W CT 2 Grid 122W CT 3 Generation -25W CT 4 None 0W CT 5 None 0W CT 6 None 0W
Supply voltage: 231.3V frequency: 49.94Hz Power: Grid : 115W Generated : -25W
at that time the generation figure was 2.5kw, house consumtiption was 2.5kw and grid 0.1kw.