Feature: NFC - Githubissues

Nexolight commented 7 years ago

NFC doesn't work yet. Working on it.

Nexolight commented 7 years ago

Get this so far:

12-27 22:01:16.000  3859  6388 D BrcmNfcJni: nfcManager_doInitialize: enter; ver=NFCDROID-AOSP_M_00.01 nfa=NFA_PI_1.03.66+ NCI_VERSION=0x10
12-27 22:01:16.000  3859  6388 D BrcmNfcJni: PowerSwitch::initialize: level=PS-FULL (1)
12-27 22:01:16.000  3859  6388 D NfcAdaptation: bool CNfcConfig::readConfig(const char*, bool) Opened base config /etc/libnfc-brcm.conf
12-27 22:01:16.005  3859  6388 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found SCREEN_OFF_POWER_STATE=(0x1)
12-27 22:01:16.005  3859  6388 D BrcmNfcJni: PowerSwitch::initialize: desired screen-off state=1
12-27 22:01:16.005  3859  6388 D NfcAdaptation: NfcAdaptation::Initialize: enter
12-27 22:01:16.005  3859  6388 E NfcAdaptation: NfcAdaptation::Initialize: ver=NFCDROID-AOSP_M_00.01 nfa=NFA_PI_1.03.66+
12-27 22:01:16.005  3859  6388 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found NFA_STORAGE=/data/nfc
12-27 22:01:16.005  3859  6388 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found PROTOCOL_TRACE_LEVEL=(0xFFFFFFFF)
12-27 22:01:16.005  3859  6388 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found NFA_MAX_EE_SUPPORTED=(0x2)
12-27 22:01:16.005  3859  6388 D NfcAdaptation: NfcAdaptation::Initialize: Overriding NFA_EE_MAX_EE_SUPPORTED to use 2
12-27 22:01:16.005  3859  6388 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found APPL_TRACE_LEVEL=(0xFF)
12-27 22:01:16.005  3859  6388 D BrcmNfcJni: initializeGlobalAppLogLevel: level=5
12-27 22:01:16.005  3859  6388 D         : verify_stack_non_volatile_store
12-27 22:01:16.005  3859  6388 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin1
12-27 22:01:16.005  3859  6388 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin2
12-27 22:01:16.005  3859  6388 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin3
12-27 22:01:16.005  3859  6388 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin4
12-27 22:01:16.005  3859  6388 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin5
12-27 22:01:16.005  3859  6388 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found PRESERVE_STORAGE=(0x1)
12-27 22:01:16.005  3859  6388 D NfcAdaptation: Initialize: preserve stack NV store
12-27 22:01:16.006  3859  6390 D NfcAdaptation: NfcAdaptation::NFCA_TASK: enter
12-27 22:01:16.006  3859  6390 I BrcmNfcNfa: GKI_run(): Start/Stop GKI_timer_update_registered!
12-27 22:01:16.013  3859  6391 D NfcAdaptation: NfcAdaptation::Thread: enter
12-27 22:01:16.014  3859  6392 I BrcmNfcNfa: NFC_TASK started.
12-27 22:01:16.014  3859  6391 D NfcAdaptation: NfcAdaptation::Thread: exit
12-27 22:01:16.014  3859  6388 D NfcAdaptation: NfcAdaptation::InitializeHalDeviceContext: enter
12-27 22:01:16.014  3859  6388 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found NCI_HAL_MODULE=nfc_nci.pn54x
12-27 22:01:16.015  3859  6388 D NxpNfcNciHal: nfc_open: enter; name=nci
12-27 22:01:16.015  3859  6388 D NxpNfcNciHal: nfc_open: exit 0
12-27 22:01:16.015  3859  6388 D NfcAdaptation: NfcAdaptation::InitializeHalDeviceContext: exit
12-27 22:01:16.015  3859  6388 D NfcAdaptation: NfcAdaptation::Initialize: exit
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: NFA_Init ()
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_dm_init ()
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_sys_register () id=1, enable_cplt_mask=0x0
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_p2p_init ()
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_sys_register () id=3, enable_cplt_mask=0x8
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_rw_init ()
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_sys_register () id=6, enable_cplt_mask=0x48
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_ce_init ()
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_sys_register () id=7, enable_cplt_mask=0xc8
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_ee_init ()
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_sys_register () id=2, enable_cplt_mask=0xcc
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_hci_init ()
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: nfa_sys_register () id=8, enable_cplt_mask=0x1cc
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: LLCP - llcp_init ()
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: num_rx_buff = 9, rx_congest_start = 6, rx_congest_end = 4, max_num_ll_rx_buff = 2
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: max_num_tx_buff = 21, max_num_ll_tx_buff = 6
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: LLCP_RegisterServer (): SAP:0x1, link_type:0x2, ServiceName:<urn:nfc:sn:sdp>
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: LLCP_RegisterServer (): Registered SAP = 0x01
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: NFA_Enable ()
12-27 22:01:16.015  3859  6388 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found APPL_TRACE_LEVEL=(0xFF)
12-27 22:01:16.015  3859  6388 D BrcmNfcJni: initializeGlobalAppLogLevel: level=5
12-27 22:01:16.015  3859  6388 I BrcmNfcNfa: NFC_SetTraceLevel () new_level = 5
12-27 22:01:16.016  3859  6392 I BrcmNfcNfa: NFA got event 0x0100
12-27 22:01:16.016  3859  6392 I BrcmNfcNfa: nfa_dm_evt_hdlr event: NFA_DM_API_ENABLE_EVT (0x00)
12-27 22:01:16.016  3859  6392 I BrcmNfcNfa: nfa_dm_enable ()
12-27 22:01:16.016  3859  6392 I BrcmNfcNfa: NFC_Enable ()
12-27 22:01:16.016  3859  6392 I BrcmNfcNfa: nfc_set_state 0 (NONE)->1 (W4_HAL_OPEN)
12-27 22:01:16.016  3859  6392 D NfcAdaptation: NfcAdaptation::HalOpen
12-27 22:01:16.027  3859  6392 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXPLOG_TML_LOGLEVEL=
12-27 22:01:16.027  3859  6392 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXPLOG_FWDNLD_LOGLEVEL=
12-27 22:01:16.027  3859  6392 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXPLOG_NCIX_LOGLEVEL=
12-27 22:01:16.027  3859  6392 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXPLOG_NCIR_LOGLEVEL=
12-27 22:01:16.027  3859  6392 D         : phNxpLog_InitializeLogLevel: global =1, Fwdnld =3, extns =3,                 hal =3, tml =3, ncir =3,
               ncix =3
12-27 22:01:16.028  3859  6392 D NxpHal  : Entering phNxpNciHal_init_monitor
12-27 22:01:16.028  3859  6392 D NxpHal  : Returning with SUCCESS
12-27 22:01:16.028  3859  6392 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_NFC_DEV_NODE=/dev/pn544
12-27 22:01:16.028  3859  6392 D NxpTml  : Opening port=/dev/pn544
12-27 22:01:16.028  3859  6392 E NxpTml  : _i2c_open() Failed: retval ffffffff
12-27 22:01:16.028  3859  6392 D NxpTml  : phTmlNfc_i2c_reset(), VEN level 0
12-27 22:01:16.028  3859  6392 E NxpHal  : phTmlNfc_Init Failed
12-27 22:01:16.028  3859  6392 D NfcAdaptation: NfcAdaptation::HalDeviceContextCallback: event=0
12-27 22:01:16.028  3859  6392 I BrcmNfcNfa: nfc_main_hal_cback event: HAL_NFC_OPEN_CPLT_EVT(0x0), status=1
12-27 22:01:16.028  3859  6392 D NxpHal  : Failed to deallocate (list empty)
12-27 22:01:16.028  3859  6392 D NxpHal  : Node dump:
12-27 22:01:16.028  3859  6392 D NxpHal  : Failed to deallocate (list empty)
12-27 22:01:16.028  3859  6392 D NxpHal  : Node dump:
12-27 22:01:16.028  3859  6392 I BrcmNfcNfa: nfc_main_handle_hal_evt(): HAL event=0x0
12-27 22:01:16.028  3859  6392 I BrcmNfcNfa: nfc_set_state 1 (W4_HAL_OPEN)->0 (NONE)
12-27 22:01:16.028  3859  6392 I BrcmNfcNfa: nfa_dm_nfc_response_cback () NFC_ENABLE_REVT(0x5000)
12-27 22:01:16.028  3859  6392 D BrcmNfcJni: nfaDeviceManagementCallback: enter; event=0x0
12-27 22:01:16.028  3859  6392 D BrcmNfcJni: nfaDeviceManagementCallback: NFA_DM_ENABLE_EVT; status=0x3
12-27 22:01:16.034  3859  6388 D NxpExtns: const CNxpNfcParam* CNxpNfcConfig::find(const char*) const found NXPLOG_TML_LOGLEVEL=
12-27 22:01:16.034  3859  6388 D NxpExtns: const CNxpNfcParam* CNxpNfcConfig::find(const char*) const found NXPLOG_FWDNLD_LOGLEVEL=
12-27 22:01:16.034  3859  6388 D NxpExtns: const CNxpNfcParam* CNxpNfcConfig::find(const char*) const found NXPLOG_NCIX_LOGLEVEL=
12-27 22:01:16.034  3859  6388 D NxpExtns: const CNxpNfcParam* CNxpNfcConfig::find(const char*) const found NXPLOG_NCIR_LOGLEVEL=
12-27 22:01:16.035  3859  6388 D         : phNxpLog_InitializeLogLevel: global =1, Fwdnld =3, extns =3,                 hal =3, tml =3, ncir =3,
               ncix =3
12-27 22:01:16.035  3859  6388 E BrcmNfcJni: nfcManager_doInitialize: fail nfa enable; error=0x0
12-27 22:01:16.035  3859  6388 D NfcAdaptation: NfcAdaptation::Finalize: enter
12-27 22:01:16.119  6243  6394 W FA      : Tasks have been queued for a long time
12-27 22:01:16.940  3859  6392 I BrcmNfcNfa: GKI TASK_DEAD received. exit thread 3...
12-27 22:01:17.039  3859  6388 D NfcAdaptation: NfcAdaptation::Finalize: exit
12-27 22:01:17.039  3859  6388 D BrcmNfcJni: nfcManager_doInitialize: exit
12-27 22:01:17.040  3859  6388 W NfcService: Error enabling NFC
12-27 22:01:17.044  3859  6390 D NfcAdaptation: NfcAdaptation::NFCA_TASK: exit

Nexolight commented 7 years ago

http://www.nxp.com/documents/application_note/AN11690.pdf Chapter 5.1 talks about that

Nexolight commented 7 years ago

Now I get this:

12-27 22:32:53.994  6501  6516 E NfcService: Watchdog triggered, aborting.
12-27 22:32:53.994  6501  6516 E BrcmNfcJni: nfcManager_doAbort: abort()
12-27 22:32:53.994  6501  6516 F libc    : Fatal signal 6 (SIGABRT), code -6 in tid 6516 (enableInternal)
12-27 22:32:53.996  2927  2927 I DEBUG   : property debug.db.uid not set; NOT waiting for gdb.
12-27 22:32:53.996  2927  2927 I DEBUG   : HINT: adb shell setprop debug.db.uid 100000
12-27 22:32:53.996  2927  2927 I DEBUG   : HINT: adb forward tcp:5039 tcp:5039
12-27 22:32:54.048  2927  2927 F DEBUG   : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
12-27 22:32:54.048  2927  2927 F DEBUG   : CM Version: '13.0-20161227-UNOFFICIAL-hwgra'
12-27 22:32:54.048  2927  2927 F DEBUG   : Build fingerprint: 'HUAWEI/cm_hwgra/hwgra:6.0.1/MOB31K/403f5d4167:userdebug/test-keys'
12-27 22:32:54.048  2927  2927 F DEBUG   : Revision: '0'
12-27 22:32:54.048  2927  2927 F DEBUG   : ABI: 'arm64'
12-27 22:32:54.048  2927  2927 F DEBUG   : pid: 6501, tid: 6516, name: enableInternal  >>> com.android.nfc <<<
12-27 22:32:54.049  2927  2927 E DEBUG   : AM write failed: Broken pipe
12-27 22:32:54.049  2927  2927 F DEBUG   : signal 6 (SIGABRT), code -6 (SI_TKILL), fault addr --------
12-27 22:32:54.074  2927  2927 F DEBUG   :     x0   0000000000000000  x1   0000000000001974  x2   0000000000000006  x3   0000000000000000
12-27 22:32:54.074  2927  2927 F DEBUG   :     x4   0000000000000000  x5   0000000000000001  x6   0000000000000000  x7   0000000000000000
12-27 22:32:54.074  2927  2927 F DEBUG   :     x8   0000000000000083  x9   0000000000000028  x10  0000007f97958a0c  x11  0000007f97958a48
12-27 22:32:54.074  2927  2927 F DEBUG   :     x12  0000007f97958920  x13  000000000000001c  x14  0000007f97958b08  x15  0000000000000000
12-27 22:32:54.074  2927  2927 F DEBUG   :     x16  0000007fae66d560  x17  0000007fae5fed7c  x18  0000007faea013e4  x19  0000007f97959500
12-27 22:32:54.074  2927  2927 F DEBUG   :     x20  0000007f97959440  x21  000000000000006e  x22  0000000000000006  x23  0000000000015f90
12-27 22:32:54.074  2927  2927 F DEBUG   :     x24  0000000000015f90  x25  0000007f979592c8  x26  0000007f97be73c8  x27  0000007fa7938508
12-27 22:32:54.074  2927  2927 F DEBUG   :     x28  0000007fa6095600  x29  0000007f97958f00  x30  0000007fae5fc518
12-27 22:32:54.074  2927  2927 F DEBUG   :     sp   0000007f97958f00  pc   0000007fae5fed84  pstate 0000000020000000
12-27 22:32:54.077  2927  2927 F DEBUG   :
12-27 22:32:54.077  2927  2927 F DEBUG   : backtrace:
12-27 22:32:54.077  2927  2927 F DEBUG   :     #00 pc 0000000000069d84  /system/lib64/libc.so (tgkill+8)
12-27 22:32:54.077  2927  2927 F DEBUG   :     #01 pc 0000000000067514  /system/lib64/libc.so (pthread_kill+68)
12-27 22:32:54.077  2927  2927 F DEBUG   :     #02 pc 0000000000023448  /system/lib64/libc.so (raise+28)
12-27 22:32:54.077  2927  2927 F DEBUG   :     #03 pc 000000000001dbe8  /system/lib64/libc.so (abort+60)
12-27 22:32:54.077  2927  2927 F DEBUG   :     #04 pc 00000000000188dc  /system/lib64/libnfc_nci_jni.so
12-27 22:32:54.077  2927  2927 F DEBUG   :     #05 pc 00000000000b33ec  /data/dalvik-cache/arm64/system@app@NfcNci@NfcNci.apk@classes.dex (offset
0x68000)
12-27 22:32:54.275  2927  2927 F DEBUG   :
12-27 22:32:54.275  2927  2927 F DEBUG   : Tombstone written to: /data/tombstones/tombstone_08
12-27 22:32:54.276  3308  3325 I BootReceiver: Copying /data/tombstones/tombstone_08 to DropBox (SYSTEM_TOMBSTONE)
12-27 22:32:54.284  3308  3325 W DropBoxManagerService: Dropping: SYSTEM_TOMBSTONE (10 > 0 bytes)
12-27 22:32:54.285  3308  3322 W BroadcastQueue: Permission Denial: receiving Intent { act=android.intent.action.DROPBOX_ENTRY_ADDED flg=0x10 (has
 extras) } to de.amazon.mShop.android/com.amazon.mcc.crashreporter.android.CrashReportBroadcastReceiver requires android.permission.READ_LOGS due
to sender android (uid 1000)
12-27 22:32:54.363  3308  3320 I ActivityManager: Process com.android.nfc (pid 6501) has died
12-27 22:32:54.363  2934  2934 I Zygote  : Process 6501 exited due to signal (6)
12-27 22:32:54.363  3308  3320 D ActivityManager: cleanUpApplicationRecord -- 6501
12-27 22:32:54.363  2912  2912 I ServiceManager: service 'nfc' died
12-27 22:32:54.364  3308  3320 W ActivityManager: Re-adding persistent process ProcessRecord{57f906f 6501:com.android.nfc/1027}
12-27 22:32:54.378  3308  3320 I ActivityManager: Start proc 6653:com.android.nfc/1027 for restart com.android.nfc
12-27 22:32:54.425  6653  6653 I NfcService: Starting NFC service
12-27 22:32:54.432  6653  6653 D BrcmNfcJni: JNI_OnLoad: enter
12-27 22:32:54.432  6653  6653 I BrcmNfcJni: NFC Service: loading nci JNI
12-27 22:32:54.432  6653  6653 D BrcmNfcJni: register_com_android_nfc_NativeNfcManager: enter
12-27 22:32:54.432  6653  6653 D BrcmNfcJni: PowerSwitch::initialize: level=PS-UNKNOWN (0)
12-27 22:32:54.432  6653  6653 D NfcAdaptation: bool CNfcConfig::readConfig(const char*, bool) Opened base config /etc/libnfc-brcm.conf
12-27 22:32:54.437  6653  6653 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found SCREEN_OFF_POWER_STATE=(0x1)
12-27 22:32:54.437  6653  6653 D BrcmNfcJni: PowerSwitch::initialize: desired screen-off state=1
12-27 22:32:54.437  6653  6653 D BrcmNfcJni: register_com_android_nfc_NativeNfcManager: exit
12-27 22:32:54.438  6653  6653 D BrcmNfcJni: register_com_android_nfc_NativeNfcTag
12-27 22:32:54.438  6653  6653 D BrcmNfcJni: RoutingManager::RoutingManager(): default route is 0x00
12-27 22:32:54.438  6653  6653 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found AID_MATCHING_MODE=(0x1)
12-27 22:32:54.438  6653  6653 D BrcmNfcJni: RoutingManager::RoutingManager(): mOffHostEe=0xF4
12-27 22:32:54.438  6653  6653 D BrcmNfcJni: RoutingManager::registerJniFunctions
12-27 22:32:54.438  6653  6653 D BrcmNfcJni: JNI_OnLoad: exit
12-27 22:32:54.438  6653  6653 D BrcmNfcJni: nfcManager_initNativeStruc: enter
12-27 22:32:54.438  6653  6653 D BrcmNfcJni: nfcManager_initNativeStruc: exit
12-27 22:32:54.440  3308  3326 D BluetoothManagerService: Message: 20
12-27 22:32:54.440  3308  3326 D BluetoothManagerService: Added callback: android.bluetooth.IBluetoothManagerCallback$Stub$Proxy@d9fb24e:true
12-27 22:32:54.440  6653  6653 W Settings: Setting device_provisioned has moved from android.provider.Settings.Secure to android.provider.Settings
.Global.
12-27 22:32:54.467  6653  6653 W NfceeAccess: could not find /etc/nfcee_access.xml, no NFCEE access allowed
12-27 22:32:54.467  6653  6653 I NfceeAccess: read 0 signature(s) for NFCEE access
12-27 22:32:54.471  6653  6653 W Settings: Setting airplane_mode_radios has moved from android.provider.Settings.System to android.provider.Settin
gs.Global, returning read-only value.
12-27 22:32:54.471  6653  6653 W Settings: Setting airplane_mode_toggleable_radios has moved from android.provider.Settings.System to android.prov
ider.Settings.Global, returning read-only value.
12-27 22:32:54.508  6653  6653 D RegisteredServicesCache: Dynamic AIDs file does not exist.
12-27 22:32:54.512  6653  6667 D NfcService: checking on firmware download
12-27 22:32:54.512  6653  6667 W Settings: Setting airplane_mode_on has moved from android.provider.Settings.System to android.provider.Settings.G
lobal, returning read-only value.
12-27 22:32:54.513  6653  6667 D NfcService: NFC is on. Doing normal stuff
12-27 22:32:54.513  6653  6667 I NfcService: Enabling NFC
12-27 22:32:54.516  6653  6667 D BrcmNfcJni: nfcManager_doInitialize: enter; ver=NFCDROID-AOSP_M_00.01 nfa=NFA_PI_1.03.66+ NCI_VERSION=0x10
12-27 22:32:54.516  6653  6667 D BrcmNfcJni: PowerSwitch::initialize: level=PS-FULL (1)
12-27 22:32:54.516  6653  6667 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found SCREEN_OFF_POWER_STATE=(0x1)
12-27 22:32:54.516  6653  6667 D BrcmNfcJni: PowerSwitch::initialize: desired screen-off state=1
12-27 22:32:54.516  6653  6667 D NfcAdaptation: NfcAdaptation::Initialize: enter
12-27 22:32:54.516  6653  6667 E NfcAdaptation: NfcAdaptation::Initialize: ver=NFCDROID-AOSP_M_00.01 nfa=NFA_PI_1.03.66+
12-27 22:32:54.516  6653  6667 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found NFA_STORAGE=/data/nfc
12-27 22:32:54.516  6653  6667 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found PROTOCOL_TRACE_LEVEL=(0xFFFFFFFF)
12-27 22:32:54.516  6653  6667 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found NFA_MAX_EE_SUPPORTED=(0x2)
12-27 22:32:54.516  6653  6667 D NfcAdaptation: NfcAdaptation::Initialize: Overriding NFA_EE_MAX_EE_SUPPORTED to use 2
12-27 22:32:54.516  6653  6667 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found APPL_TRACE_LEVEL=(0xFF)
12-27 22:32:54.516  6653  6667 D BrcmNfcJni: initializeGlobalAppLogLevel: level=5
12-27 22:32:54.516  6653  6667 D         : verify_stack_non_volatile_store
12-27 22:32:54.516  6653  6667 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin1
12-27 22:32:54.516  6653  6667 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin2
12-27 22:32:54.516  6653  6667 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin3
12-27 22:32:54.516  6653  6667 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin4
12-27 22:32:54.516  6653  6667 D NfcNciHal: crcChecksumVerifyIntegrity: filename=/data/nfc/nfaStorage.bin5
12-27 22:32:54.516  6653  6667 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found PRESERVE_STORAGE=(0x1)
12-27 22:32:54.516  6653  6667 D NfcAdaptation: Initialize: preserve stack NV store
12-27 22:32:54.517  6653  6670 D NfcAdaptation: NfcAdaptation::Thread: enter
12-27 22:32:54.517  6653  6671 I BrcmNfcNfa: NFC_TASK started.
12-27 22:32:54.517  6653  6670 D NfcAdaptation: NfcAdaptation::Thread: exit
12-27 22:32:54.517  6653  6667 D NfcAdaptation: NfcAdaptation::InitializeHalDeviceContext: enter
12-27 22:32:54.517  6653  6667 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found NCI_HAL_MODULE=nfc_nci.pn54x
12-27 22:32:54.517  6653  6669 D NfcAdaptation: NfcAdaptation::NFCA_TASK: enter
12-27 22:32:54.517  6653  6669 I BrcmNfcNfa: GKI_run(): Start/Stop GKI_timer_update_registered!
12-27 22:32:54.519  6653  6667 D NxpNfcNciHal: nfc_open: enter; name=nci
12-27 22:32:54.519  6653  6667 D NxpNfcNciHal: nfc_open: exit 0
12-27 22:32:54.519  6653  6667 D NfcAdaptation: NfcAdaptation::InitializeHalDeviceContext: exit
12-27 22:32:54.519  6653  6667 D NfcAdaptation: NfcAdaptation::Initialize: exit
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_dm_init ()
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_sys_register () id=1, enable_cplt_mask=0x0
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_sys_register () id=3, enable_cplt_mask=0x8
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_rw_init ()
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_sys_register () id=6, enable_cplt_mask=0x48
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_ce_init ()
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_sys_register () id=7, enable_cplt_mask=0xc8
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_ee_init ()
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_sys_register () id=2, enable_cplt_mask=0xcc
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_hci_init ()
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: nfa_sys_register () id=8, enable_cplt_mask=0x1cc
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: LLCP - llcp_init ()
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: num_rx_buff = 9, rx_congest_start = 6, rx_congest_end = 4, max_num_ll_rx_buff = 2
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: max_num_tx_buff = 21, max_num_ll_tx_buff = 6
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: LLCP_RegisterServer (): SAP:0x1, link_type:0x2, ServiceName:<urn:nfc:sn:sdp>
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: LLCP_RegisterServer (): Registered SAP = 0x01
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: NFA_Enable ()
12-27 22:32:54.519  6653  6667 D NfcAdaptation: const CNfcParam* CNfcConfig::find(const char*) const found APPL_TRACE_LEVEL=(0xFF)
12-27 22:32:54.519  6653  6667 D BrcmNfcJni: initializeGlobalAppLogLevel: level=5
12-27 22:32:54.519  6653  6671 I BrcmNfcNfa: NFA got event 0x0100
12-27 22:32:54.519  6653  6667 I BrcmNfcNfa: NFC_SetTraceLevel () new_level = 5
12-27 22:32:54.519  6653  6671 I BrcmNfcNfa: nfa_dm_evt_hdlr event: NFA_DM_API_ENABLE_EVT (0x00)
12-27 22:32:54.519  6653  6671 I BrcmNfcNfa: nfa_dm_enable ()
12-27 22:32:54.519  6653  6671 I BrcmNfcNfa: NFC_Enable ()
12-27 22:32:54.519  6653  6671 I BrcmNfcNfa: nfc_set_state 0 (NONE)->1 (W4_HAL_OPEN)
12-27 22:32:54.519  6653  6671 D NfcAdaptation: NfcAdaptation::HalOpen
12-27 22:32:54.537  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXPLOG_TML_LOGLEVEL=
12-27 22:32:54.537  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXPLOG_FWDNLD_LOGLEVEL=
12-27 22:32:54.537  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXPLOG_NCIX_LOGLEVEL=
12-27 22:32:54.537  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXPLOG_NCIR_LOGLEVEL=
12-27 22:32:54.537  6653  6671 D         : phNxpLog_InitializeLogLevel: global =1, Fwdnld =3, extns =3,                 hal =3, tml =3, ncir =3,
               ncix =3
12-27 22:32:54.537  6653  6671 D NxpHal  : Entering phNxpNciHal_init_monitor
12-27 22:32:54.537  6653  6671 D NxpHal  : Returning with SUCCESS
12-27 22:32:54.537  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_NFC_DEV_NODE=/dev/pn544
12-27 22:32:54.537  6653  6671 D NxpTml  : Opening port=/dev/pn544
12-27 22:32:54.537  6653  6671 D NxpTml  : phTmlNfc_i2c_reset(), VEN level 0
12-27 22:32:54.622  6653  6671 D NxpTml  : phTmlNfc_i2c_reset(), VEN level 1
12-27 22:32:54.652  6653  6671 D NxpTml  : phTmlNfc_set_pid(), pid  6653
12-27 22:32:54.652  6653  6673 D NxpTml  : PN54X - Tml Reader Thread Started................
12-27 22:32:54.652  6653  6671 D NxpTml  : nfc service set pid failed
12-27 22:32:54.652  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Started................
12-27 22:32:54.652  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.652  6653  6676 D NxpHal  : thread started
12-27 22:32:54.652  6653  6676 D NfcAdaptation: NfcAdaptation::HalDeviceContextCallback: event=0
12-27 22:32:54.652  6653  6676 I BrcmNfcNfa: nfc_main_hal_cback event: HAL_NFC_OPEN_CPLT_EVT(0x0), status=0
12-27 22:32:54.652  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.652  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.652  6653  6671 I BrcmNfcNfa: NFC_TASK got NFC_TASK_EVT_TRANSPORT_READY.
12-27 22:32:54.652  6653  6671 I BrcmNfcNfa: nfc_set_state 1 (W4_HAL_OPEN)->2 (CORE_INIT)
12-27 22:32:54.652  6653  6671 D NfcAdaptation: NfcAdaptation::HalWrite
12-27 22:32:54.652  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found MIFARE_READER_ENABLE=
12-27 22:32:54.653  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.653  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.653  6653  6674 D NxpNciX : len =   4 > 20000101
12-27 22:32:54.653  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.653  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.653  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.653  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.684  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.684  6653  6673 D NxpNciR : len =   6 > 400003001001
12-27 22:32:54.684  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.685  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.685  6653  6676 D NfcAdaptation: NfcAdaptation::HalDeviceContextDataCallback: len=6
12-27 22:32:54.685  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.685  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.685  6653  6671 I BrcmNfcNfa: NFC received rsp gid:0
12-27 22:32:54.685  6653  6671 I BrcmNfcNfa: nci_proc_core_rsp opcode:0x0
12-27 22:32:54.685  6653  6671 D NfcAdaptation: NfcAdaptation::HalWrite
12-27 22:32:54.685  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found MIFARE_READER_ENABLE=
12-27 22:32:54.687  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.687  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.687  6653  6674 D NxpNciX : len =   3 > 200100
12-27 22:32:54.687  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.687  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.687  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.687  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.688  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.688  6653  6673 D NxpNciR : len =  26 > 40011700030E03000600010203818202C800FF02000405080125
12-27 22:32:54.688  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.688  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.688  6653  6676 D NxpHal  : NxpNci> FW Version: 8.1.25
12-27 22:32:54.688  6653  6676 D NfcAdaptation: NfcAdaptation::HalDeviceContextDataCallback: len=26
12-27 22:32:54.688  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.688  6653  6671 I BrcmNfcNfa: NFC received rsp gid:0
12-27 22:32:54.688  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.688  6653  6671 I BrcmNfcNfa: nci_proc_core_rsp opcode:0x1
12-27 22:32:54.688  6653  6671 I BrcmNfcNfa: nfc_set_state 2 (CORE_INIT)->3 (W4_POST_INIT_CPLT)
12-27 22:32:54.688  6653  6671 D NfcAdaptation: NfcAdaptation::HalCoreInitialized
12-27 22:32:54.688  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_ACT_PROP_EXTN=/
12-27 22:32:54.689  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.689  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.689  6653  6674 D NxpNciX : len =   3 > 2F0200
12-27 22:32:54.689  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.689  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.689  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.689  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.689  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.689  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.689  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.689  6653  6673 D NxpNciR : len =   8 > 4F020500000088AF
12-27 22:32:54.689  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.689  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.689  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.689  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.689  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.689  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.689  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_CORE_STANDBY=/
12-27 22:32:54.690  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.690  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.690  6653  6674 D NxpNciX : len =   4 > 2F000101
12-27 22:32:54.690  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.690  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.690  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.690  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.690  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.690  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.693  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.693  6653  6673 D NxpNciR : len =   4 > 4F000100
12-27 22:32:54.693  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.694  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.694  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.694  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.694  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.694  6653  6671 D NxpHal  : request_EEPROM Enter  request_type : 0x01,  request_mode : 0x01,  bufflen : 0x01
12-27 22:32:54.694  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.694  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.694  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.694  6653  6674 D NxpNciX : len =   6 > 20030301A00F
12-27 22:32:54.694  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.694  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.694  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.694  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.694  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.694  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.696  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.696  6653  6673 D NxpNciR : len =  40 > 4003250001A00F200001250100000101000000000100000000000000000000000000000000000000
12-27 22:32:54.696  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.696  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.696  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:54.696  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.696  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.696  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.696  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.696  6653  6671 D NxpHal  : EEPROM_fw_dwnld_flag : 0x01 SetConfigAlways flag : 0x00
12-27 22:32:54.696  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_SYS_CLK_SRC_SEL=
12-27 22:32:54.696  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_SYS_CLK_FREQ_SEL=
12-27 22:32:54.696  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_SYS_CLOCK_TO_CFG=
12-27 22:32:54.696  6653  6671 D NxpFwDnld: gphNxpNciHal_fw_IoctlCtx.bClkSrcVal = 0x2
12-27 22:32:54.696  6653  6671 D NxpFwDnld: gphNxpNciHal_fw_IoctlCtx.bClkFreqVal = 0x2
12-27 22:32:54.696  6653  6671 D NxpFwDnld: gphNxpNciHal_fw_IoctlCtx.bClkFreqVal = 0x1
12-27 22:32:54.696  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.696  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.696  6653  6674 D NxpNciX : len =  10 > 20030703A002A003A004
12-27 22:32:54.696  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.696  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.696  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.696  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.697  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.697  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.697  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.698  6653  6673 D NxpNciR : len =  17 > 40030E0003A0020100A0030111A0040101
12-27 22:32:54.698  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.698  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.698  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:54.698  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.698  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.698  6653  6671 D         : int nxp::CNfcConfig::checkTimestamp() file not exist.
12-27 22:32:54.698  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.698  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.698  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.698  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.698  6653  6674 D NxpNciX : len =  12 > 20020902A0030111A0040101
12-27 22:32:54.698  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.698  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.698  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.699  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.699  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.699  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.705  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.705  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:54.705  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.705  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.705  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:54.705  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.705  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.705  6653  6671 D NxpHal  : phNxpNciHal_check_factory_reset file not present = /data/nfc/nfaStorage.bin1
12-27 22:32:54.705  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.705  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.705  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.705  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.706  6653  6674 D NxpNciX : len =  26 > 20021702A0EA08FFFFFFFFFFFFFFFFA0EB08FFFFFFFFFFFFFFFF
12-27 22:32:54.706  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.706  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.706  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.706  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.706  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.706  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.712  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.712  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:54.712  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.712  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.712  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:54.712  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.712  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.713  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_NFC_PROFILE_EXTN= �D
12-27 22:32:54.713  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.713  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.713  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.713  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.713  6653  6674 D NxpNciX : len =   8 > 20020501A0440100
12-27 22:32:54.713  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.713  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.713  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.713  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.713  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.714  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.717  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.717  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:54.717  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.717  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.717  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:54.717  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.717  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.717  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.717  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.717  6653  6671 D NxpHal  : Performing RF Settings BLK 1
12-27 22:32:54.717  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_RF_CONF_BLK_1= � �
12-27 22:32:54.717  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.717  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.723  6653  6674 D NxpNciX : len = 246 > 2002F320A00D03004008A00D03044320A00D0304FF05A00D060644A3900300A00D060630CF000800A00D06062F8
F05800CA00D040603006FA00D03064819A00D030643A0A00D0606420000F6F6A00D06064180000000A00D03063718A00D03061600A00D03061500A00D0606FF05000000A00D0608440
0000000A00D06204A00000000A00D0620428810FFFFA00D03201600A00D03201500A00D06224422000200A00D06222D50440C00A00D043203403DA00D063242F810FFFFA00D0332160
0A00D03321501A00D03320D22A00D03321422A00D06324A3007011FA00D06342D24770C00A00D0634340000E403A00D06344421000200
12-27 22:32:54.723  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.723  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.723  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.723  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.723  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.723  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.829  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.829  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:54.829  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.830  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.830  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:54.830  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.830  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.830  6653  6671 D NxpHal  : Performing RF Settings BLK 2
5D!27 22:32:54.830  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_RF_CONF_BLK_2= ��
12-27 22:32:54.830  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.830  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.830  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.830  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.838  6653  6674 D NxpNciX : len = 247 > 2002F41FA00D06354421000200A00D06384A5307011BA00D0638426810FFFFA00D03381600A00D03381500A00D0
63A2D15470D00A00D063C4A5207011BA00D063C426810FFFFA00D033C1600A00D033C1500A00D063E2D15470D00A00D064042F010FFFFA00D03400D02A00D03401402A00D06404A120
70000A00D03401600A00D03401500A00D06422D15470D00A00D06464421000200A00D06462D05470E00A00D06444A33070107A00D0644428810FFFFA00D03441600A00D03441500A00
D064A4422000200A00D064A2D05370C00A00D06484A33070107A00D0648428810FFFFA00D03481600A00D03481500A00D064E4422000200
12-27 22:32:54.838  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.838  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.838  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.839  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.839  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.839  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:54.934  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:54.934  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:54.934  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:54.935  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:54.935  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:54.935  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:54.935  6653  6671 D NxpHal  : Checking response
12-27 22:32:54.935  6653  6671 D NxpHal  : Performing RF Settings BLK 3
N-727 22:32:54.935  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_RF_CONF_BLK_3= ��

12-27 22:32:54.935  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:54.935  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:54.935  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:54.936  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:54.943  6653  6674 D NxpNciX : len = 250 > 2002F71EA00D064E2D05370C00A00D064C4A33070107A00D064C428810FFFFA00D034C1600A00D034C1500A00D0
6524422000200A00D06522D05250C00A00D0650429010FFFFA00D06504A110F0107A00D03501600A00D03501500A00D06562D059E0C00A00D06564422000200A00D065C2D05690C00A
00D065C4421000200A00D0654428810FFFFA00D06544A33070107A00D03541600A00D03541500A00D065A429010FFFFA00D065A4A31070107A00D035A1600A00D035A1500A00D06982
FAF05800FA00D069A420000FFFFA00D063044A3900300A00D066C44A3900300A00D066C30CF000800A00D066C2F8F05800CA00D06702F8F058012
12-27 22:32:54.943  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:54.943  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:54.943  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:54.944  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:54.944  6653  6671 D NxpHal  : Response timer started
12-27 22:32:54.944  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:55.033  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:55.033  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:55.033  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:55.034  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:55.034  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:55.034  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:55.034  6653  6671 D NxpHal  : Checking response
12-27 22:32:55.034  6653  6671 D NxpHal  : Performing RF Settings BLK 4
p0�27 22:32:55.034  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_RF_CONF_BLK_4= ��
12-27 22:32:55.034  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:55.034  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:55.034  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:55.034  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:55.042  6653  6674 D NxpNciX : len = 250 > 2002F71EA00D067030CF000800A00D06742F8F058012A00D067430DF000700A00D06782F1F068001A00D0678303
F000400A00D067844A2900300A00D03784700A00D067C2FAF05800FA00D067C30CF000700A00D067C44A3900300A00D067D30CF000800A00D06802FAF058090A00D068044A3900300A
00D06842FAF058092A00D068444A3900300A00D06882F7F048010A00D0688305F001600A00D03884700A00D068844A1900300A00D030C4819A00D03104320A00D066A42F810FFFFA00
D036A1600A00D036A1501A00D066A4A300F011FA00D068C428810FFFFA00D068C4A33070107A00D038C1600A00D038C1500A00D0692429010FFFF
12-27 22:32:55.042  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:55.042  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:55.042  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:55.043  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:55.043  6653  6671 D NxpHal  : Response timer started
12-27 22:32:55.043  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:55.135  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:55.135  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:55.135  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:55.136  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:55.136  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:55.136  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:55.136  6653  6671 D NxpHal  : Checking response
12-27 22:32:55.136  6653  6671 D NxpHal  : Performing RF Settings BLK 5
�J1�7 22:32:55.136  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_RF_CONF_BLK_5= 7�
12-27 22:32:55.136  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:55.136  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:55.137  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:55.137  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:55.139  6653  6674 D NxpNciX : len =  58 > 20023707A00D06924A31070107A00D03921600A00D03921500A00D060A30CF000800A00D060A2F8F05800CA00D0
30A4810A00D060A44A3900300
12-27 22:32:55.139  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:55.139  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:55.139  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:55.139  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:55.139  6653  6671 D NxpHal  : Response timer started
12-27 22:32:55.139  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:55.160  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:55.160  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:55.160  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:55.161  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:55.161  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:55.161  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:55.161  6653  6671 D NxpHal  : Checking response
12-27 22:32:55.161  6653  6671 D NxpHal  : Performing RF Settings BLK 6
12-27 22:32:55.162  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_RF_CONF_BLK_6=(0x0)
12-27 22:32:55.162  6653  6671 D NxpHal  : Performing NAME_NXP_CORE_CONF_EXTN Settings
12-27 22:32:55.162  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_CORE_CONF_EXTN= N�
12-27 22:32:55.162  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:55.162  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:55.162  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:55.162  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:55.165  6653  6674 D NxpNciX : len =  81 > 20024E12A0020100A0030111A0040101A00902E803A00E0101A01104CD672201A0120100A0130100A0400101A04
10102A0420119A0430100A05E0101A0610100A0CD0118A0EC0101A0ED0100A047020027
12-27 22:32:55.165  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:55.165  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:55.165  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:55.165  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:55.165  6653  6671 D NxpHal  : Response timer started
12-27 22:32:55.165  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:55.219  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:55.219  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:55.219  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:55.219  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:55.219  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:55.220  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:55.220  6653  6671 D NxpHal  : Checking response
12-27 22:32:55.220  6653  6671 D NxpHal  : Performing NAME_NXP_CORE_CONF Settings
!2-27 22:32:55.220  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_CORE_CONF= +
12-27 22:32:55.220  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:55.220  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:55.221  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:55.221  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:55.222  6653  6674 D NxpNciX : len =  46 > 20022B0D1801012101002801003001083101033304010203045001025401065B010060010E80010181010182010
E
12-27 22:32:55.222  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:55.223  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:55.223  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:55.223  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:55.223  6653  6671 D NxpHal  : Response timer started
12-27 22:32:55.224  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:55.265  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:55.265  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:55.265  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:55.265  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:55.266  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:55.266  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:55.266  6653  6671 D NxpHal  : Checking response
12-27 22:32:55.266  6653  6671 D NxpExtns: const nxp::CNfcParam* nxp::CNfcConfig::find(const char*) const found NXP_CORE_RF_FIELD= �b
12-27 22:32:55.266  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:55.266  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:55.267  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:55.267  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:55.268  6653  6674 D NxpNciX : len =   8 > 20020501A0620100
12-27 22:32:55.268  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:55.268  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:55.268  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:55.268  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:55.269  6653  6671 D NxpHal  : Response timer started
12-27 22:32:55.269  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:55.273  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:55.273  6653  6673 D NxpNciR : len =   5 > 4002020000
12-27 22:32:55.273  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:55.274  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:55.274  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_OK
12-27 22:32:55.274  6653  6671 D NxpHal  : Response timer stopped
12-27 22:32:55.274  6653  6671 D NxpHal  : Checking response
12-27 22:32:55.274  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:55.274  6653  6673 D NxpTml  : PN54X - Read requested.....
12-27 22:32:55.274  6653  6673 D NxpTml  : PN54X - Invoking I2C Read.....
12-27 22:32:55.274  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:55.275  6653  6674 D NxpNciX : len =   8 > 20030502A086A087
12-27 22:32:55.275  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:55.275  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:55.275  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................
12-27 22:32:55.275  6653  6676 D NxpHal  : write successful status = 0x0
12-27 22:32:55.275  6653  6671 D NxpHal  : Response timer started
12-27 22:32:55.275  6653  6671 D NxpHal  : Waiting after ext cmd sent
12-27 22:32:55.276  6653  6673 D NxpTml  : PN54X - I2C Read successful.....
12-27 22:32:55.276  6653  6673 D NxpNciR : len =  11 > 4003080902A08600A08700
12-27 22:32:55.276  6653  6673 D NxpTml  : PN54X - Posting read message.....
12-27 22:32:55.276  6653  6676 D NxpHal  : read successful status = 0x0
12-27 22:32:55.276  6653  6676 D NxpHal  : phNxpNciHal_print_res_status: response status =STATUS_INVALID_PARAM
12-27 22:32:55.276  6653  6676 W NxpHal  : Invalid Data from config file . Aborting..
12-27 22:32:55.277  6653  6674 D NxpTml  : PN54X - Write requested.....
12-27 22:32:55.277  6653  6674 D NxpTml  : PN54X - Invoking I2C Write.....
12-27 22:32:55.278  6653  6674 D NxpNciX : len =  10 > 21030703800181018201
12-27 22:32:55.278  6653  6674 D NxpTml  : PN54X - I2C Write successful.....
12-27 22:32:55.278  6653  6674 D NxpTml  : PN54X - Posting Fresh Write message.....
12-27 22:32:55.278  6653  6674 D NxpTml  : PN54X - Tml Writer Thread Running................

Nexolight commented 7 years ago

The line "Invalid Data from config file . Aborting.." may be responsible ... Well it's nice to have a very verbose but meaningless log. Can't you tell me what exactly is invalid? *eyeroll.
btw. This "len = n > xxxxx" these are the bytes as hex found in the configs. The answer comes from the firmware (I guess). So huawei may have used another version wich uses slightly different config parameters.
I'm trying to use the buildable config (or template) and adapt huaweis settings there.
The issue is still the same... Now I try the official npx firmware blob.
I'm a bit out of ideas. No it did not work. So something must be wrong (version missmatch) with the shipped config and some other part of the stack.
I just uncommented the line which aborts on error. It looks like it's just a single setting. I can enable nfc and well it react's to tags at least.
I could connect my headset via nfc tag by using the merged nfc config and the uncommented abort on error line. Now I need to figure out what exactly that is and do some tests by reading out cards.
Reading metadata from the tags seems fine... The original conf files seem to be fine as well except that one invalid setting.

The only negative signs so far:

12-28 04:51:38.703  3898  7240 E BrcmNfcJni: nfaDeviceManagementCallback: NFA_DM_GET_CONFIG failed
12-28 04:51:38.703  3898  7243 D NxpTml  : PN54X - Read requested.....
12-28 04:51:38.703  3898  7236 E BrcmNfcJni: enableDisableLptd: Config TLV length 0 returned is too short
...
12-28 04:51:38.703  3898  7240 D BrcmNfcJni: nfaConnectionCallback: event= 39
12-28 04:51:38.703  3898  7240 E BrcmNfcJni: nfaConnectionCallback: unknown event ????

Android beam does work as well. Atm I can't test more things and I'm running out of time. So a modified repo will be a workaround.

Nexolight commented 7 years ago

Merged branches and changed title. Now we may discuss about what we could improve.

CM-Huawei-P8-Development / device_gra_l09

Feature: NFC #5