search

CR6Community / CR-6-touchscreen

CR-6 SE touchscreen software extended with more functionality and pages than the stock CR-6 touchscreen software.
https://cr6community-support-team.gitbook.io/cr6comm-touchscreen-refactored-firmware-docs/
152 stars 34 forks source link

usage of dwinos_page_change.bin #100

Closed Das-Weeman closed 1 year ago

Das-Weeman commented 1 year ago

Hi, can someone please explain whats the usage of this file? i inadvertently flashed only this file and now the lcd is stuck with only a loading bar thats not loading and it wont accept ANY new files that im trying to reflash, resultin in zeros and noughts...

Thinkersbluff commented 1 year ago

That particular file is automatically generated and inserted into DWIN_SET by the DGUSTools application. I have no idea what it does.

This is the first time I have heard of this particular problem. Thank you for flagging it. Sorry for your troubles.

The display bootloader should be configured (by the T5L…cfg file) to look for the DWIN_SET folder. It will then only try to flash whatever it finds in that folder, from the few file types that it “recognizes”.

Can you flash the display with the T5L…cfg file alone in the DWIN _SET folder? If not, please try a different card.

Das-Weeman commented 1 year ago

Hi Thinkersbluff,

Thank you for your reply, i think i got it sorted out, at least to the point it flashes the first 3 sets of numbers, still gets hung up on the HZT (?) Font file, but i'll try again tonight, perhaps first flash the cfg, then the hzt, then the rest together. I did a full format, not quick, through the harddrive manager, which took a while.

When i first checked the Dgus2, i was running v4.3 as stock, should i go to v3.5 with 6.1 bundled lcd fw or v4.5 with the refactored fw for the lcd? Perhaps that is also where im slipping up...

Thank you for replying, much love and appreciation all the way from South Africa...

Yours truly, Will Labuschagne

On Tue, 16 May 2023, 11:58 Thinkersbluff, @.***> wrote:

That particular file is automatically generated and inserted into DWIN_SET by the DGUSTools application. I have no idea what it does.

This is the first time I have heard of this particular problem. Thank you for flagging it. Sorry for your troubles.

The display bootloader should be configured (by the T5L…cfg file) to look for the DWIN_SET folder. It will then only try to flash whatever it finds in that folder, from the few file types that it “recognizes”.

Can you flash the display with the T5L…cfg file alone? If not, please try a different card.

— Reply to this email directly, view it on GitHub https://github.com/CR6Community/CR-6-touchscreen/issues/100#issuecomment-1549360807, or unsubscribe https://github.com/notifications/unsubscribe-auth/A74DRIUTWU6POALCHWXRYBTXGNFTVANCNFSM6AAAAAAYCWKCBI . You are receiving this because you authored the thread.Message ID: @.***>

Thinkersbluff commented 1 year ago

“When i first checked the Dgus2, i was running v4.3 as stock, should i go to v3.5 with 6.1 bundled lcd fw or v4.5 with the refactored fw for the lcd?“

I would not upgrade from 4.3 to 4.5. You would also have to recalibrate the touchscreen to get it working with 4.5, and the Refactored UI runs fine on 4.3.

Das-Weeman commented 1 year ago

Hi there,

Just a update, i did manage to get everything up and running, CF 6.1 and all, the main problem that i had was that my sd card adapter developed a bad connection on it and decided to quit. So i got a new adapter card with 8gb sd card, and boom ..... No hassle installing both main board and lcd firmware .. but now i have a mesh that looks like the attached pic. I did the calibration with no bowden installed, so theres no strain on the gauge, but i still get this mesh... Any advice??

Thank you again for all your effort with the firmware, much appreciated...

Yours truly

On Tue, 16 May 2023, 11:58 Thinkersbluff, @.***> wrote:

That particular file is automatically generated and inserted into DWIN_SET by the DGUSTools application. I have no idea what it does.

This is the first time I have heard of this particular problem. Thank you for flagging it. Sorry for your troubles.

The display bootloader should be configured (by the T5L…cfg file) to look for the DWIN_SET folder. It will then only try to flash whatever it finds in that folder, from the few file types that it “recognizes”.

Can you flash the display with the T5L…cfg file alone? If not, please try a different card.

— Reply to this email directly, view it on GitHub https://github.com/CR6Community/CR-6-touchscreen/issues/100#issuecomment-1549360807, or unsubscribe https://github.com/notifications/unsubscribe-auth/A74DRIUTWU6POALCHWXRYBTXGNFTVANCNFSM6AAAAAAYCWKCBI . You are receiving this because you authored the thread.Message ID: @.***>

Thinkersbluff commented 1 year ago

I have closed the original issue, since it turned out to be a card failure, not a bug in the firmware.

I recommend you post an image of your bed mesh on the #bed-leveling channel on the Discord.

Das-Weeman commented 1 year ago

Thank you, I will do that.

On Sat, 01 Jul 2023, 03:17 Thinkersbluff, @.***> wrote:

I have closed the original issue, since it turned out to be a card failure, not a bug in the firmware.

I recommend you post an image of your bed mesh on the #bed-leveling channel on the Discord.

— Reply to this email directly, view it on GitHub https://github.com/CR6Community/CR-6-touchscreen/issues/100#issuecomment-1615328063, or unsubscribe https://github.com/notifications/unsubscribe-auth/A74DRIVZZCEGQZOSNUPXHO3XN53BXANCNFSM6AAAAAAYCWKCBI . You are receiving this because you authored the thread.Message ID: @.***>