search

CR6Community / CR-6-touchscreen

CR-6 SE touchscreen software extended with more functionality and pages than the stock CR-6 touchscreen software.
https://cr6community-support-team.gitbook.io/cr6comm-touchscreen-refactored-firmware-docs/
151 stars 34 forks source link

Stuck in boot loading #76

Closed jayse2006 closed 2 years ago

jayse2006 commented 2 years ago

Printer says the bootloader is confused. attempted to reflash the firmware but it wont do anything other than display the start screen.

Thinkersbluff commented 2 years ago

This is not enough information for me to help you. That error message says try another card. If that is not helping, you may do better raising this as a discussion in the Discord channel.

jayse2006 commented 2 years ago

I’ve tried a different card and even tried booting without the SD card in it. It’s been left on over night to give it time to try and boot. It has worked for months with the firmware and now this pops up

jayse2006 commented 2 years ago

![Uploading image.jpg…]()

Thinkersbluff commented 2 years ago

It has worked for months with the firmware and now this pops up

If the printer worked on this firmware for months, then it does not sound like this is a bug in the firmware. It sounds more like the firmware is working correctly, but the motherboard bootloader is not.

I recommend that you come discuss your hardware issue on the Community.

https://discord.gg/yDY6pb2BQS