search

CR6Community / Marlin

This Marlin fork has the goal of cleaning-up the source code changes for the CR-6 so it can be merged upstream. We also want to extend the functionality to make it fully functional
GNU General Public License v3.0
474 stars 82 forks source link

[BUG](Print origin set at homing point) #330

Closed Dennis54 closed 2 years ago

Dennis54 commented 2 years ago

Did you test the latest extui code or prerelease?

Yes, and the problem still exists.

Bug Description

Firmware update to Rel 5, reinstalled Cura

When starting a print after going through the tedious setup, the printer starts at the Homing point and not the origin(centre of the build plate).

Bug Timeline

This issue occurred after error PID thermal control

Expected behavior

only the top right quadrant of the job printed

Actual behavior

No response

Steps to Reproduce

No response

Version of CR6Community Firmware

Rel 5

Printer model

Creality CR-6 SE

Motherboard

Creality v4.5.3

Display

Creality CR-6 stock touch screen

Mods

none

Add-ons

standard

Bed Leveling

No response

Your Slicer

Cura

Host Software

SD Card (headless)

Thinkersbluff commented 2 years ago

Sorry, Dennis, I am confused.

Have you programmed Cura to think that 0,0 is in the middle of the bed? Untitled

Dennis54 commented 2 years ago

hi there You are not as confused as me, I have reinstalled cura to the latest version and de installed my printers, on the printer set-up I have set the origin as the centre of the bed. Also upgraded the firmware of the printer to version rel 6 all axis work well as well as bed levelling Please find attached zip file with all info Regards Dennis ( Just as confused) Printer useless CR6-SE Files.zip https://drive.google.com/file/d/1NG-oc3jzzKf6XZrmeVV1cGR5awbIygGL/view?usp=drive_web

On Tue, Nov 1, 2022 at 5:55 AM Thinkersbluff @.***> wrote:

Sorry, Dennis, I am confused.

  • The latest Community Firmware release is 6.1.
  • The origin (X=0,Y=0) point is the front left corner of the bed, not the center

Have you programmed Cura to think that 0,0 is in the middle of the bed?

— Reply to this email directly, view it on GitHub https://github.com/CR6Community/Marlin/issues/330#issuecomment-1297990023, or unsubscribe https://github.com/notifications/unsubscribe-auth/AO43RAVJL6BPLWTZNNEA6QDWGCIDXANCNFSM6AAAAAARTASFXQ . You are receiving this because you authored the thread.Message ID: @.***>

Thinkersbluff commented 2 years ago

"on the printer set-up I have set the origin as the centre of the bed."

I say again, the origin is NOT at the center of the bed. Deselect that setting in Cura.

Dennis54 commented 2 years ago

Wow, it's working, thanks for your patience. regards Dennis

On Thu, Nov 3, 2022 at 3:17 PM Thinkersbluff @.***> wrote:

"on the printer set-up I have set the origin as the centre of the bed."

I say again, the origin is NOT at the center of the bed. Deselect that setting in Cura.

— Reply to this email directly, view it on GitHub https://github.com/CR6Community/Marlin/issues/330#issuecomment-1302103923, or unsubscribe https://github.com/notifications/unsubscribe-auth/AO43RAROFZNVCS5O4PYYCVTWGO3QDANCNFSM6AAAAAARTASFXQ . You are receiving this because you authored the thread.Message ID: @.***>