Open vetzki opened 3 years ago
HeteroChromia420
commented
3 years ago As a linux user, i find this very interesting. will give this a try once a version for 2.13 comes out. thanks for letting me know that k3b works fine for burning though!
maephisto666
commented
3 years ago thanks, just wanted to share that burning the dvd with k3b worked (tried to set 1x speed manually but the dvd only supported 2x so this was used then by k3b. everything else was set to auto.). dvd took awhile to get recognized by the ps2 (probably laser issue), already thought the dvd doesn't work
detailed log:
Devices ----------------------- PIONEER DVD-RW DVRTD11RS 1.01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM, DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung, DVD-RAM, DVD-RW Eingeschränktes Überbrennen, DVD-RW sequenziell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überbrennen, Sprung zwischen DVD-Schichten] [%7] System ----------------------- K3b Version: 19.12.3 KDE Version: 5.68.0 Qt Version: 5.14.2 Kernel: 4.19.114-1-MANJARO Used versions ----------------------- cdrecord: 3.2a09 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 SCSI buffer size: 64512 cdrecord: Warning: Cannot read drive buffer. cdrecord: Warning: The DMA speed test has been skipped. Cdrecord-ProDVD-ProBD-Clone 3.02a09 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2016 Joerg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.9'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVRTD11RS' Revision : '1.01' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: DVD-R sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-R/DL sequential recording Profile: DVD+R/DL Profile: DVD+R Profile: DVD+RW Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD-RAM Profile: DVD-R sequential recording (current) Profile: DVD-ROM Profile: CD-RW Profile: CD-R Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 686080 = 670 KB FIFO size : 4194304 = 4096 KB Track 01: data 7 MB Total size: 7 MB = 3586 sectors Current Secsize: 2048 Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 2294302 Reducing transfer size from 64512 to 32768 bytes. Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session. Last chance to quit, starting real write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Starting new track at sector: 0 Track 01: 0 of 7 MB written. Track 01: 1 of 7 MB written (fifo 99%) [buf 100%] 0,0x. Track 01: 2 of 7 MB written (fifo 99%) [buf 100%] 2,0x. Track 01: 3 of 7 MB written (fifo 100%) [buf 100%] 2,0x. Track 01: 4 of 7 MB written (fifo 100%) [buf 100%] 2,0x. Track 01: 5 of 7 MB written (fifo 100%) [buf 100%] 2,0x. Track 01: 6 of 7 MB written (fifo 100%) [buf 100%] 2,0x. Track 01: 7 of 7 MB written (fifo 100%) [buf 100%] 2,0x. Track 01: Total bytes read/written: 7344128/7344128 (3586 sectors). Writing time: 55.242s (00:00:55.242) Average write speed 0,1x. Min drive buffer fill was 100% Fixating... Fixating time: 405.211s (00:06:45.211) cdrecord: fifo had 225 puts and 225 gets. cdrecord: fifo was 0 times empty and 47 times full, min fill was 89%. BURN-Free was 5 times used. cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=1 -sao driveropts=burnfree -data -tsize=3586s -
Which SPCH model do you have? Could you specify that?
vetzki
commented
3 years ago Model is SCPH-30004R (Pal)
thanks, just wanted to share that burning the dvd with k3b worked (tried to set 1x speed manually but the dvd only supported 2x so this was used then by k3b. everything else was set to auto.). dvd took awhile to get recognized by the ps2 (probably laser issue), already thought the dvd doesn't work
detailed log: