Outboard Service

[smr547]

The outboard is probably due for maintenance. It's starting ok but running roughly. Crew reports a missing rubber plug on the throttle. Recommend we schedule a service upon arrival in Airlie.

@delcosta will be skipper -- could you organise the service please? @peterottesen for info

[peterottesen]

Correction. Rubber plug on main engine throttle lever.

Sent from my iPhone

On 20 May 2021, at 12:21 pm, Steven Ring @.***> wrote:

 The outboard is probably due for maintenance. It's starting ok but running roughly. Crew reports a missing rubber plug on the throttle. Recommend we schedule a service upon arrival in Airlie.

@delcosta will be skipper -- could you organise the service please? @peterottesen for info

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

[delcosta]

Steve Noted about the outboard. It also needs fresh water flush.

Regards, Sam DeLorenzo Mobile & WhatsApp: +61 411 165 835 PO Box 3553, Manuka ACT AUSTRALIA 2603

IMPORTANT This e-mail and any accompanying attachments are intended for the sole use of the addressee(s) and may contain confidential information. If you are not the intended recipient (or authorised designee), please disregard the contents of this e-mail, notify the sender immediately and destroy all copies of this e-mail.

From: Steven Ring @.> Sent: Thursday, 20 May 2021 12:21 To: CanberraOceanRacingClub/namadgi3 @.> Cc: Sam Delorenzo (Delorco) @.>; Mention @.> Subject: [CanberraOceanRacingClub/namadgi3] Outboard maintenance (#385)

The outboard is probably due for maintenance. It's starting ok but running roughly. Crew reports a missing rubber plug on the throttle. Recommend we schedule a service upon arrival in Airlie.

@delcostahttps://github.com/delcosta will be skipper -- could you organise the service please? @peterottesenhttps://github.com/peterottesen for info

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/CanberraOceanRacingClub/namadgi3/issues/385, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AHK6QYUR2D3WOGHN6OFTXLDTORWX5ANCNFSM45F37A3A.

[smr547]

Outboard booked for service at Coral Seas Marina.

Pick up and delivery, same day service -- if booked early AM

Whitsunday Outboard Centre 17 William Murray Dr, Cannonvale QLD 4802, Australia +61 7 4946 7286

Talk to Mark

https://goo.gl/maps/d9oCgq13bQSFFgbq8

[smr547]

Service booked in for Friday 9/7/21 — Mark will pick up the motor from the roundabout at the marina around 8am and return it serviced by close of business same day. The service will include a fuel refresh (old fuel recycled and new fuel provided).

I’ll also get a measuring cylinder and spare fuel mixing/storage container (5 litres). All 2 stroke to be premixed in the 5 litre can before being brought onto Namadgi.

@PSARN @delcosta will be interested.

[smr547]

Outboard was serviced on 9/7/21 -- see attached invoice.

Next service due in 6 months (at end of this cruise). Closing this issue for now.

INV00019647.pdf

[smr547]

Assign this issue to Everything Marine Australia, Coomera for service November 2022 Also note we need to have a list of spares procured for the Pacific Cruise

[smr547]

@Christopher-w-green will look at having this service done at Airlie along with the Volvo service.

[smr547]

Service completed by Seatech at Boatwork 12/11/22 Next service in 12 months

[smr547]

reopening this issue -- service outboard at Boatworks this November

@pcbaston will be interested

[smr547]

Recent report:

The Dinghy motor is stalling at low speed. A service may be required. Spark plug cleaned but did not fix the stalling issue.

[smr547]

Serviced by Sea Tech Marine. Propellor shaft and seals needed to be replaced plus regular service.