search

CanberraOceanRacingClub / namadgi3

Maintenance management system for Namadgi 3
1 stars 2 forks source link

Centre Cockpit Locker - Broken Hinge to teak lid #698

Closed pcbaston closed 5 months ago

pcbaston commented 1 year ago

Allister Polkinghorne sent a message advising that the centre cockpit locker had a broken hinge. See photo.

IMG_20230511_150841

Not urgent yet, but a replacement should be sourced.

pcbaston commented 1 year ago

An OEM replacement may be found at SVB website- page https://www.svb24.com/en/category/hinges-fittings-for-boats and need crew to confirm which one by dimensions. Belive it may be the ROCA Stainless Steel Hinge / 24 x 24 x 30 mm. Once confirmed, a local alternative may be found. Looks like both hinges are broken from abusive use.

smr547 commented 1 year ago

Hi Paul,

I think you are right these are the correct replacement hinges. The screw spacings closer to the pivot are a litle wider in the new units but a simple hardwood plug glued in the old holes will fix the problem.

drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdf

pcbaston commented 1 year ago

OK, I'll order 2. Is there a local agent or is it best/quicker to get direct from SVB?

Paul Baston

On Sat, 27 May 2023, 05:04 Steven Ring, @.***> wrote:

Hi Paul,

I think you are right these are the correct replacement hinges https://www.svb24.com/en/roca-stainless-steel-hinge-24-x-24-x-30-mm.html. The screw spacings closer to the pivot are a litle wider in the new units but a simple hardwood plug glued in the old holes will fix the problem.

drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdf https://github.com/CanberraOceanRacingClub/namadgi3/files/11580218/drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdf

— Reply to this email directly, view it on GitHub https://github.com/CanberraOceanRacingClub/namadgi3/issues/698#issuecomment-1565008570, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4W7HMAAWNI22QLJCPNBJ4TXIESH5ANCNFSM6AAAAAAX5SQNDQ . You are receiving this because you were assigned.Message ID: @.***>

pcbaston commented 1 year ago

PS. I'm still in Vietnam and working remotely, sporadically.

Paul Baston

On Sat, 27 May 2023, 05:04 Steven Ring, @.***> wrote:

Hi Paul,

I think you are right these are the correct replacement hinges https://www.svb24.com/en/roca-stainless-steel-hinge-24-x-24-x-30-mm.html. The screw spacings closer to the pivot are a litle wider in the new units but a simple hardwood plug glued in the old holes will fix the problem.

drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdf https://github.com/CanberraOceanRacingClub/namadgi3/files/11580218/drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdf

— Reply to this email directly, view it on GitHub https://github.com/CanberraOceanRacingClub/namadgi3/issues/698#issuecomment-1565008570, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4W7HMAAWNI22QLJCPNBJ4TXIESH5ANCNFSM6AAAAAAX5SQNDQ . You are receiving this because you were assigned.Message ID: @.***>

pcbaston commented 1 year ago

Paul FYI Hafele also make these hinges. See link below If ay are available in Italy, I am at Viareggio (Boat building place) and can try pick up. In the meantime I will use the ROCA drawing as a guide and see if I come across any. I will be on the boat in a couple weeks. I will let you know how I go. (Via Whatsapp)

https://www.ebay.it/itm/125740101255?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20200818143230%26meid%3D0c9df28712254a56867e46a3de22048e%26pid%3D101224%26rk%3D2%26rkt%3D5%26sd%3D234670440361%26itm%3D125740101255%26pmt%3D1%26noa%3D1%26pg%3D2047675%26algv%3DDefaultOrganicWebV9BertRefreshRanker%26brand%3D-+Senza+marca%2FGenerico+-&_trksid=p2047675.c101224.m-1

Regards, Sam DeLorenzo Mobile & WhatsApp: +61 411 165 835 PO Box 3553, Manuka ACT AUSTRALIA 2603

IMPORTANT This e-mail and any accompanying attachments are intended for the sole use of the addressee(s) and may contain confidential information. If you are not the intended recipient (or authorised designee), please disregard the contents of this e-mail, notify the sender immediately and destroy all copies of this e-mail

From: Paul Baston @.> Sent: Saturday, May 27, 2023 10:02 AM To: CanberraOceanRacingClub/namadgi3 @.> Cc: CanberraOceanRacingClub/namadgi3 @.>; Sam Delorenzo (Delorco) @.>; Peter Wain @.***> Subject: Re: [CanberraOceanRacingClub/namadgi3] Centre Cockpit Locker - Broken Hinge to teak lid (Issue #698)

OK, I'll order 2. Is there a local agent or is it best/quicker to get direct from SVB? Paul Baston

On Sat, 27 May 2023, 05:04 Steven Ring, @.**@.>> wrote:

Hi Paul,

I think you are right these are the correct replacement hingeshttps://www.svb24.com/en/roca-stainless-steel-hinge-24-x-24-x-30-mm.html. The screw spacings closer to the pivot are a litle wider in the new units but a simple hardwood plug glued in the old holes will fix the problem.

drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdfhttps://github.com/CanberraOceanRacingClub/namadgi3/files/11580218/drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdf

— Reply to this email directly, view it on GitHubhttps://github.com/CanberraOceanRacingClub/namadgi3/issues/698#issuecomment-1565008570, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A4W7HMAAWNI22QLJCPNBJ4TXIESH5ANCNFSM6AAAAAAX5SQNDQ. You are receiving this because you were assigned.Message ID: @.**@.>>

pcbaston commented 1 year ago

Sam, I don't think these hinges are what we need. They would need some modifications to the cockpit hatch to fit as they are longer. The ROCA ones referenced are small and, although no none has confirmed size matches current hinge, they look the most likely candidate. I'll order two from SVB and speak to skipper once they arrive.

I thought you'd be back by now, so thanks for the offer to source in Italy.

On Sat, 27 May 2023, 15:53 Sam Delorenzo (Delorco), < @.***> wrote:

Paul

FYI Hafele also make these hinges. See link below

If ay are available in Italy, I am at Viareggio (Boat building place) and can try pick up.

In the meantime I will use the ROCA drawing as a guide and see if I come across any.

I will be on the boat in a couple weeks.

I will let you know how I go. (Via Whatsapp)

https://www.ebay.it/itm/125740101255?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20200818143230%26meid%3D0c9df28712254a56867e46a3de22048e%26pid%3D101224%26rk%3D2%26rkt%3D5%26sd%3D234670440361%26itm%3D125740101255%26pmt%3D1%26noa%3D1%26pg%3D2047675%26algv%3DDefaultOrganicWebV9BertRefreshRanker%26brand%3D-+Senza+marca%2FGenerico+-&_trksid=p2047675.c101224.m-1

Regards,

Sam DeLorenzo

Mobile & WhatsApp: +61 411 165 835

PO Box 3553, Manuka ACT AUSTRALIA 2603

IMPORTANT This e-mail and any accompanying attachments are intended for the sole use of the addressee(s) and may contain confidential information. If you are not the intended recipient (or authorised designee), please disregard the contents of this e-mail, notify the sender immediately and destroy all copies of this e-mail

From: Paul Baston @.> Sent: Saturday, May 27, 2023 10:02 AM To: CanberraOceanRacingClub/namadgi3 < @.> Cc: CanberraOceanRacingClub/namadgi3 @.>; Sam Delorenzo (Delorco) @.>; Peter Wain < @.**> Subject:* Re: [CanberraOceanRacingClub/namadgi3] Centre Cockpit Locker - Broken Hinge to teak lid (Issue #698)

OK, I'll order 2.

Is there a local agent or is it best/quicker to get direct from SVB?

Paul Baston

On Sat, 27 May 2023, 05:04 Steven Ring, @.***> wrote:

Hi Paul,

I think you are right these are the correct replacement hinges https://www.svb24.com/en/roca-stainless-steel-hinge-24-x-24-x-30-mm.html. The screw spacings closer to the pivot are a litle wider in the new units but a simple hardwood plug glued in the old holes will fix the problem.

drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdf https://github.com/CanberraOceanRacingClub/namadgi3/files/11580218/drawing_2020-06-15_13-00-26_ae28e44473224841eb2da9cec977d1d0.pdf

— Reply to this email directly, view it on GitHub https://github.com/CanberraOceanRacingClub/namadgi3/issues/698#issuecomment-1565008570, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4W7HMAAWNI22QLJCPNBJ4TXIESH5ANCNFSM6AAAAAAX5SQNDQ . You are receiving this because you were assigned.Message ID: < @.***>

Paul Baston

pcbaston commented 1 year ago

OK. I tried to order online from SVB24.com but when I attempt to pay, there is no shipping included. A bit wary of the additional cost later.. So I used PayPal and, including shipping, the cost was 1700 Euros - so, obviously, I'm not paying that stupid price to ship two hinges.
I sent a query to SVB24.com via email and have not received a response for 2 days, so this may be a futile effort. Watch this space......

pcbaston commented 1 year ago

I cancelled the SVB24.com order due to excessive postage costs. The nearest replacement hinge found at whitworths is this 72x40mm @ 10.95 ea. Peter Ottesen advised me that he repaired the hatch cover wusing plastic, which appears to be providing a good temporary solution. Added to maintenance period in Fiji, New Caledonia or Southport.

DimitD commented 7 months ago

I have sourced hinges from EBay, and will fit next time boat is at berth in Sydney

pcbaston commented 5 months ago

Are the hinges available other than SVB24? No one seems to want to modify the teak for an alternative, so we seem stuck to OEM. Any thoughts. Should we purchase from SVB24? Are there other items to ameliorate postage charges (they send everything DHL Priority Express).

DimitD commented 5 months ago

image

I ordered these 2 months ago and they just came in. Happy to install next time I'm in Sydney and the boat is at berth. We have two spare's now as well

DimitD commented 5 months ago

Paul

Not sure if you saw the note on Github, I have hinges in hand now and will install next available.

Thanks

Dimitri Dermatis Director Living Design Projects 10/1 Pirie Street, FYSHWICK ACT 2609 m 0417 687 264 e @.***

On Thu, 25 Jan 2024 at 20:32, Paul Baston @.***> wrote:

Are the hinges available other than SVB24? No one seems to want to modify the teak for an alternative, so we seem stuck to OEM. Any thoughts. Should we purchase from SVB24? Are there other items to ameliorate postage charges (they send everything DHL Priority Express).

— Reply to this email directly, view it on GitHub https://github.com/CanberraOceanRacingClub/namadgi3/issues/698#issuecomment-1909749269, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3JO3MPWQ5XAAJHCAK6C5TLYQIRDVAVCNFSM6AAAAAAX5SQNDSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMBZG42DSMRWHE . You are receiving this because you commented.Message ID: @.***>

smr547 commented 5 months ago

Well done Dimitri -- the hinges look good.

pcbaston commented 5 months ago

Dimitri, Yes, I saw the note. Glad you advised me because I was going to order them too. I tried a year ago, but the DHL Express postage was stupidly high. Well done. Please be aware you may need to add something to the screw holes in order to strengthen. Your a builder, so I guess you'll have a solution handy. I trust the hinges come with screes as I don't know where the screws are. I may have taken them home by mistake - I'll search the packets of rubbish I was clearing out of the bilges wet. Let you know when I'm home

I also need to do some Maintenance on the boat,so if you have a day available (the boat that is), let me know and I'll try to come down to do electrical stuff.

Paul Baston

On Thu, 1 Feb 2024, 11:08 DimitD, @.***> wrote:

Paul

Not sure if you saw the note on Github, I have hinges in hand now and will install next available.

Thanks

Dimitri Dermatis Director Living Design Projects 10/1 Pirie Street, FYSHWICK ACT 2609 m 0417 687 264 e @.***

On Thu, 25 Jan 2024 at 20:32, Paul Baston @.***> wrote:

Are the hinges available other than SVB24? No one seems to want to modify the teak for an alternative, so we seem stuck to OEM. Any thoughts. Should we purchase from SVB24? Are there other items to ameliorate postage charges (they send everything DHL Priority Express).

— Reply to this email directly, view it on GitHub < https://github.com/CanberraOceanRacingClub/namadgi3/issues/698#issuecomment-1909749269>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/A3JO3MPWQ5XAAJHCAK6C5TLYQIRDVAVCNFSM6AAAAAAX5SQNDSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMBZG42DSMRWHE>

. You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/CanberraOceanRacingClub/namadgi3/issues/698#issuecomment-1920224570, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4W7HMDIEDGHDXCFIOT7XP3YRLMHFAVCNFSM6AAAAAAX5SQNDSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRQGIZDINJXGA . You are receiving this because you were assigned.Message ID: @.***>

DimitD commented 5 months ago

Repaired

image

pcbaston commented 5 months ago

Looks great. Well done Dimitri..

Paul Baston

On Tue, 20 Feb 2024, 10:44 DimitD, @.***> wrote:

Closed #698 https://github.com/CanberraOceanRacingClub/namadgi3/issues/698 as completed.

— Reply to this email directly, view it on GitHub https://github.com/CanberraOceanRacingClub/namadgi3/issues/698#event-11855125663, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4W7HMHDX7274UUXMU5RK33YUPPWRAVCNFSM6AAAAAAX5SQNDSVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJRHA2TKMJSGU3DMMY . You are receiving this because you were assigned.Message ID: @.*** .com>