Open CarlFK opened 2 months ago
MESS:00:00:52.141263:0: brfs: File read: /mfs/sd/initramfs8 MESS:00:00:52.145141:0: Loaded 'initramfs8' to 0x0 size 0xaf996d MESS:00:00:52.163838:0: initramfs loaded to 0x2e506000 (size 0xaf996d) MESS:00:00:57.460249:0: brfs: File read: /mfs/sd/kernel8.img MESS:00:00:57.464220:0: Loaded 'kernel8.img' to 0x200000 size 0x8d8bd7 MESS:00:00:59.906135:0: Device tree loaded to 0x2e4fd000 (size 0x8fe1) MESS:00:00:59.911045:0: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined MESS:00:00:59.920088:0: uart: Set PL011 baud rate to 103448.300000 Hz MESS:00:00:59.926380:0: uart: Baud rate change done... MESS:00:00:59.929810:0: uart: Baud rate change done... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.6.31+rpt-rpi-v8 (serge@raspberrypi.com) (gcc-12 (Debian 12.2.0- 14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024 -05-29) [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] efi: UEFI not found. [ 5.620775] usb 1-1.5: SerialNumber: 00A6CFB1 [16/1888] [ 6.178855] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 6.204753] Sending DHCP requests .., OK [ 8.408745] IP-Config: Got DHCP answer from 10.21.0.1, my address is 10.21.0.113 [ 8.416168] IP-Config: Complete: [ 8.419410] device=eth0, hwaddr=b8:27:eb:68:fc:e7, ipaddr=10.21.0.113, mask=255.255.25 5.0, gw=10.21.0.1 [ 8.429263] host=pi13, domain=mithis.com, nis-domain=(none) [ 8.435287] bootserver=10.21.0.1, rootserver=10.21.0.1, rootpath= [ 8.435298] nameserver0=10.21.0.1 [ 8.446104] clk: Disabling unused clocks [ 8.450876] uart-pl011 3f201000.serial: no DMA platform data [ 8.467923] Freeing unused kernel memory: 4864K [ 8.472684] Run /init as init process [ 8.476791] Failed to execute /init (error -26) [ 8.481387] Run /sbin/init as init process [ 8.485719] Starting init: /sbin/init exists but couldn't execute it (error -26) [ 8.493139] Run /etc/init as init process [ 8.497322] Run /bin/init as init process [ 8.501508] Run /bin/sh as init process [ 8.505511] Starting init: /bin/sh exists but couldn't execute it (error -26) [ 8.512674] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. [ 8.526848] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.31+rpt-rpi-v8 #1 Debian 1:6.6.31 -1+rpt1 [ 8.535813] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 8.541644] Call trace: [ 8.544088] dump_backtrace+0xa0/0x100 [ 8.547851] show_stack+0x20/0x38 [ 8.551168] dump_stack_lvl+0x48/0x60 [ 8.554839] dump_stack+0x18/0x28 [ 8.558160] panic+0x330/0x398 [ 8.561223] kernel_init+0x1ac/0x1f8 [ 8.564808] ret_from_fork+0x10/0x20 [ 8.568392] SMP: stopping secondary CPUs [ 8.572320] Kernel Offset: 0x26b6000000 from 0xffffffc080000000 [ 8.578237] PHYS_OFFSET: 0x0 [ 8.581114] CPU features: 0x0,0000000d,00020000,0000421b [ 8.586426] Memory Limit: none [ 8.589481] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---
CarlFK
commented
2 months ago CarlFK
commented
2 months ago