Wrong command output for sclear command

[CeereeC]

This is the command output for sclear in the UG

When I run sclear, the output is just "Show all schedules"

video:https://raw.githubusercontent.com/CeereeC/pe/main/files/e83702a2-0b5a-4cb5-bcb8-b84afe2470cb.mov

[soc-pe-bot]

Team's Response

Thanks for your issue. We will fix it soon.

The 'Original' Bug

[The team marked this bug as a duplicate of the following bug]

Wrong command output for sadd command

In the UG, the output for the sadd command is shown as such

However, when I run the command, it just says "Show all schedules" and there is no indication I ran sadd

---

_{[original: nus-cs2103-AY2223S1/pe-interim#3306] [original labels: type.FeatureFlaw severity.Low]}

Their Response to the 'Original' Bug

[This is the team's response to the above 'original' bug]

Thanks for your issue. We will fix it soon.

Items for the Tester to Verify

:question: Issue duplicate status

Team chose to mark this issue as a duplicate of another issue (as explained in the Team's response above)

• [ ] I disagree

Reason for disagreement: [replace this with your explanation]

---

:question: Issue severity

Team chose [severity.VeryLow] Originally [severity.Low]

• [ ] I disagree

Reason for disagreement: [replace this with your explanation]

---