How to upload? - Githubissues

Ch4rlus / ninebot_firmware

Extracted / Dumped Firmware for Ninebot ES2

27 stars 2 forks source link

How to upload? #1

Open beckmx opened 5 years ago

beckmx commented 5 years ago

Hello, do u know How to upload the firmware?

Ch4rlus commented 5 years ago

Unfortunately there's no (known) "easy" way to do it at the moment.

There's probably 2 ways of doing it :

The "hardware" way => Unsolder and flash the firmware with the proper tools
The software way : By doing a MITM attack against your own Ninebot, you should be able to fake the "update server" and deliver any software. In the past, it as been confirmed that there was no signature check regarding the .bin files. I do not know if this is still true.

beckmx commented 5 years ago

I saw in another site that you can upload with a smt programmer

noiseqowoy commented 5 years ago

These files need to be prepared in order to flash the microcontrollers, as for instance, the EEPROM on the BLE is like 2 kB. I have a dump of said MCU but i cannot recognize how to process this update.

rbotte commented 5 years ago

Is there any update on flashing tools or any guide available to the mitm procedure?

Thanks!