design holder for serial port on erika

Kaibu commented 4 years ago

would hold up better and no more filing on connectors

cyroxx commented 4 years ago

What do you mean by "holder" and "filing"?

sirexeclp commented 4 years ago

Currently the serial port is hold using two metal brackets. These interfere with the connector cable and require filing off the sides of the connector plug. With a 3d printed holder this could be avoided.

Matthias Jacob notifications@github.com schrieb am Mi., 15. Jan. 2020, 23:52:

What do you mean by "holder" and "filing"?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Chaostreff-Potsdam/erika3004/issues/62?email_source=notifications&email_token=AE2LUIJ7TMOZK5TN2CQAUXTQ56HS7A5CNFSM4KFVFU62YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJCDC4A#issuecomment-574894448, or unsubscribe https://github.com/notifications/unsubscribe-auth/AE2LUINOMQNLKUXBJCS5Q2DQ56HS7ANCNFSM4KFVFU6Q .

Kaibu commented 4 years ago

I'll get that done next week so we can print some, It's really annoying

leosok commented 3 years ago

FYI there are still original EFS-26 around.

Chaostreff-Potsdam / erika3004

design holder for serial port on erika #62