Open fiser321 opened 7 months ago
The warning is because you are not running at a least an ampere-architecture GPU, which would be the 3090 generation and later cards. Aside from the verbose output, the plot should still be valid (and plot a little slower), however I'm not sure if the DrSolver will work on the same card, as it has not been tested with pre-ampere cards yet.
Right now you would get this same issue running the DrSolver:
I want to get a plot with P40 then run the DrSolver with RTX 4090 is OK ?
That should be ok If you get confirmation of completion of the plot (I.e. it completes and shows you the bits per proof and compression levels of the plot)
On Fri, Feb 2, 2024 at 6:40 PM Fisher @.***> wrote:
I want to get a plot with P40 then run the DrSolver with RTX 4090 is OK ?
— Reply to this email directly, view it on GitHub https://github.com/drnick23/drplotter/issues/8#issuecomment-1924387137, or unsubscribe https://github.com/notifications/unsubscribe-auth/AALE7CN6JIHC55P74HFKPV3YRUQIVAVCNFSM6AAAAABCWGYV4WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRUGM4DOMJTG4 . You are receiving this because you commented.Message ID: @.***>
@fiser321 Curious to know, how long does it take you to make a plot on the p40?
@fiser321 Curious to know, how long does it take you to make a plot on the p40?
30 minutes on DDR3, slow, even if speeded up twice.
@Voodoo-Chia make a plot about 26 minutes Suggest 3090 graphics card