search

China863SDN / DCFabric

An Open Source SDN Controller for Cloud Computing Data Centers
13 stars 13 forks source link

[ERROR] Get controller inet info failed #4

Open dongwenting opened 7 years ago

dongwenting commented 7 years ago

启动只有这个报错，无其他详细信息。 Ubuntu启动无问题，CentOS 7不行。

dwt@lenovo:~/DCFabric/DCFabric-controller$ ./DCFabric

yangleo commented 7 years ago

config/sdn-controller.conf 修改 manager_eth= 为该控制器所使用的的管理口

dongwenting commented 7 years ago

我修改了，centos 7默认端口为eno16777736 启动还是报错 [controller] manager_eth=eno16777736

dongwenting commented 7 years ago

[root@localhost DCFabric-controller]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:3e:e7:0b brd ff:ff:ff:ff:ff:ff inet 192.168.2.105/24 brd 192.168.2.255 scope global dynamic eno16777736 valid_lft 81318sec preferred_lft 81318sec inet6 fe80::20c:29ff:fe3e:e70b/64 scope link valid_lft forever preferred_lft forever

yangleo commented 7 years ago

关闭防火墙，查看6633,6634和6640端口是否占用或者被禁用了 这个错误信息就是指管理口和端口配置错误

dongwenting commented 7 years ago

防火墙关闭了，检查这几个端口都没被占用，还是启动失败。 为何ubuntu没问题，换成centos就不行

yangleo commented 7 years ago

可能是网络配置问题吧

dongwenting commented 7 years ago

终于解决了，DCFabric不支持CentOS 7的默认网络端口eno16777736。 参考Centos7+juno（官方）安装+DCFabric对接手册.doc第一部分centos 7安装，修改CentOS 7的网络端口为eth0。 然后将manager_eth=eth0，启动成功.

PS：管理员文档有点过时了，hbase部分并没有提供create_database.hb和hbase-0.94.22.jar ，make之后并未生成DCFabric_debug，而是DCFabric