Open igor9silva opened 8 months ago
Hi,
This is very interesting. Do you run docker that has some network bridges? Are you connected via wifi or ethernet? When netscanner
cannot create datalink it's either not having an active interface that can create that datalink channel or not connected at all to any network.
@Chleba I use OrbStack for Docker, but do not have it running. I'm on a WiFi network.
Anything I can do to help debug?
Hi,
netscanner
is creating datalink from active interface. That interface has to be badly chosen for that datalink.
Maybe if I can ask you for a output from this command ?
ifconfig | pcregrep -M -o '^[^\t:]+(?=:([^\n]|\n\t)*status: active)'
This was my output:
en0
awdl0
en9
en7
Without the iPhone attached it gives me
en0
awdl0
But netscanner
will fail with the very same output.
Hi, quick question. Do you have IPv6 only network? Could you pass me please whole output from ifconfig? That may help. Thanks
Hmm, interesting question.
The actual reason I got interested in netscanner
is because I'm dealing with an insistent ERR_NETWORK_CHANGED on Chrome (specifically) for months. Similar to https://support.google.com/chrome/thread/138398422/frequent-err-network-changed-errors?hl=en.
At some point someone suggested that turning off IPv6 would help, so I did it (but it used to be IPv6 only, yes).
Narrator: it did not solve.
My current ifconfig
output:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
anpi1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 56:31:dd:d1:78:ab
media: none
status: inactive
anpi0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 56:31:dd:d1:78:aa
media: none
status: inactive
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 56:31:dd:d1:78:8a
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en4: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 56:31:dd:d1:78:8b
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:c4:9c:20:db:80
media: autoselect <full-duplex>
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:c4:9c:20:db:84
media: autoselect <full-duplex>
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 36:c4:9c:20:db:80
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x0
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 8 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 9 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media: <unknown type>
status: inactive
ap1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether 72:ed:3c:12:a7:2b
inet6 fe80::70ed:3cff:fe12:a72b%ap1 prefixlen 64 scopeid 0xb
nd6 options=201<PERFORMNUD,DAD>
media: autoselect (<unknown type>)
status: inactive
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether 50:ed:3c:12:a7:2b
inet6 fe80::1467:62ce:9d73:df17%en0 prefixlen 64 secured scopeid 0xc
inet 192.168.1.121 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
awdl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether da:88:07:eb:01:9d
inet6 fe80::d888:7ff:feeb:19d%awdl0 prefixlen 64 scopeid 0xd
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
llw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether da:88:07:eb:01:9d
inet6 fe80::d888:7ff:feeb:19d%llw0 prefixlen 64 scopeid 0xe
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet6 fe80::1784:eda:b17c:b245%utun0 prefixlen 64 scopeid 0xf
nd6 options=201<PERFORMNUD,DAD>
utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::5ef6:29a3:bfd3:f751%utun1 prefixlen 64 scopeid 0x10
nd6 options=201<PERFORMNUD,DAD>
utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::9911:c04f:6e39:342f%utun2 prefixlen 64 scopeid 0x11
nd6 options=201<PERFORMNUD,DAD>
utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1000
inet6 fe80::ce81:b1c:bd2c:69e%utun3 prefixlen 64 scopeid 0x12
nd6 options=201<PERFORMNUD,DAD>
utun5: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::7dc1:3886:7857:3808%utun5 prefixlen 64 scopeid 0x14
nd6 options=201<PERFORMNUD,DAD>
utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::a5b:38be:59ea:dbfb%utun6 prefixlen 64 scopeid 0x15
nd6 options=201<PERFORMNUD,DAD>
utun7: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::187e:b8fe:69b6:b510%utun7 prefixlen 64 scopeid 0x16
nd6 options=201<PERFORMNUD,DAD>
utun8: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::d2ec:bd6d:bbcc:d9ee%utun8 prefixlen 64 scopeid 0x17
nd6 options=201<PERFORMNUD,DAD>
utun9: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::10c7:3bdf:248a:7cdf%utun9 prefixlen 64 scopeid 0x1c
nd6 options=201<PERFORMNUD,DAD>
utun10: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::573e:e9ed:f6db:5071%utun10 prefixlen 64 scopeid 0x1d
nd6 options=201<PERFORMNUD,DAD>
utun11: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1000
inet6 fe80::ce81:b1c:bd2c:69e%utun11 prefixlen 64 scopeid 0x1e
nd6 options=201<PERFORMNUD,DAD>
utun12: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet6 fe80::40dc:1f0:bdad:a8f9%utun12 prefixlen 64 scopeid 0x1f
nd6 options=201<PERFORMNUD,DAD>
Public IP:
The only ouput I can get is (running with sudo, installed via Cargo):
I'm on a MacBook Air M1.