Open fuchs-1978 opened 9 months ago
Chris-656
commented
9 months ago Hi,
The systems recognizes when there is no water in the sauna ofen when humidity is above 0% and reports an error. The adapter then automatically switches the humidity down to 0 , otherwise the sauno will switch off.
regards Chris
fuchs-1978
commented
9 months ago That is exactly my question, how does the control unit recognize this? There is no signal input for a sensor or anything comparable.
Chris-656
commented
9 months ago Maybe on the current consumption. Since it working like a water header. When no water is inside you will get a peek. Regards Chris
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: fuchs-1978 @.> Sent: Tuesday, February 13, 2024 5:17:47 PM To: Chris-656/ioBroker.huum-sauna @.> Cc: Bester Quester @.>; Comment @.> Subject: Re: [Chris-656/ioBroker.huum-sauna] Frage (Issue #33)
That is exactly my question, how does the control unit recognize this? There is no signal input for a sensor or anything comparable.
— Reply to this email directly, view it on GitHubhttps://github.com/Chris-656/ioBroker.huum-sauna/issues/33#issuecomment-1941930616, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANSL57U2KG3CUOWHBOAW3JLYTOG2XAVCNFSM6AAAAABDBC4VP6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTANRRGY. You are receiving this because you commented.Message ID: @.***>
Über den Adapter wird folgender Wert abgerufen:
steamerError:0
Wie bemerkt die Steuerung einen Fehler im Verdampfer?