Closed jeffmaeder closed 6 years ago
OK, I'll take a look.
On Sun, Mar 18, 2018 at 8:35 AM, jeffmaeder notifications@github.com wrote:
The button on the new version 1.4 is not executing a move to position like in the 1.1 software.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Chris-Annin/AR2/issues/11, or mute the thread https://github.com/notifications/unsubscribe-auth/ATpgLSZt_VWrgSfS1ytz-4vSyaHKUOynks5tfn7IgaJpZM4SvPvI .
I think I see the issue. im on it. I'll let you know when I have a fix.
posted updated files. I believe the bug is fixes as I havnt been able to recreate after. please confirm
The updated files still seem to have the bug. If I teach the fine calibration position , then jog any axis off the taught position, when I press the move to fine calibration position, nothing happens. This is the position that is stored when I use the teach calibration position button:
Move J [*] X) 628.08 Y) 0.001 Z) 169.769 W) -90.0 P) 90.0 R) -90.0 T) 201.5 Speed-25 Ad 0 As 100 Dd 0 Ds 100 $F
Ok I’ll look again I must be missing something obvious. Thank you for your help and pointing this out.
Sent from my iPhone
On Mar 20, 2018, at 6:40 PM, jeffmaeder notifications@github.com wrote:
The updated files still seem to have the bug. If I teach the fine calibration position , then jog any axis off the taught position, when I press the move to fine calibration position, nothing happens. This is the position that is stored when I use the teach calibration position button:
Move J [*] X) 628.08 Y) 0.001 Z) 169.769 W) -90.0 P) 90.0 R) -90.0 T) 201.5 Speed-25 Ad 0 As 100 Dd 0 Ds 100 $F
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub, or mute the thread.
The button on the new version 1.4 is not executing a move to position like in the 1.1 software.