search

Chris-Annin / AR2

6 axis stepper motor robot and control software - Gen2
1.39k stars 419 forks source link

CAD Files for new Version #12

Closed BauerPh closed 6 years ago

BauerPh commented 6 years ago

Hi, At first many thanks for your new version. Would you provide the CAD files for the new 3D printed version? We need them to built your robot within a school project at a german school for automation technologies.

Thanks in advance.

Chris-Annin commented 6 years ago

what files do you need? with the kickstarter trying to launch aluminum kits i havnt posted the step files. do you need solidworks files or step files?

On Sun, Mar 18, 2018 at 10:32 AM, Philipp Bauer notifications@github.com wrote:

Hi, At first many thanks for your new version. Would you provide the CAD files for the new 3D printed version? We need them to built your robot within a school project at a german school for automation technologies.

Thanks in advance.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Chris-Annin/AR2/issues/12, or mute the thread https://github.com/notifications/unsubscribe-auth/ATpgLQ-nuji49jp7CSngLGbPE_EUg5kuks5tfpovgaJpZM4SvSnD .

BauerPh commented 6 years ago

solidworks assembly would be great!

BauerPh commented 6 years ago

And 2 another questions:

Chris-Annin commented 6 years ago

email me at chris.annin@gmail.com and I will try and get you the files you need.

Chris-Annin commented 6 years ago

I did switch from ATX to aviation plugs and separate wires as this makes it more practical to make cables of any length you need. I removed the ATX cable from the design - I just updated the wiring harness manual and removed it from the BOM -thanks for pointing that out.

The belt was stretching too much so I opted for the chain.

soswow commented 6 years ago

@Chris-Annin I am just curious why those CAD files are not part of a repo?