search

Chris-Annin / AR2

6 axis stepper motor robot and control software - Gen2
1.39k stars 419 forks source link

Missing screw holes in Base support part 1 and 2 #5

Closed Johansson-D closed 6 years ago

Johansson-D commented 6 years ago

Hi Chris_Annin. I just joined this "little" project. :) The M4 holes in the Base support part 1 and 2 are missing, or should one drill them? The M4 holes are shown in the BOM pdf on page 3.

File names: J1 base support spacer part 1 2017.09.18 J1 base support spacer part 2 2017.09.18

Best regards and THAN YOU for sharing this/ Dahniel

Chris-Annin commented 6 years ago

hello, I was thinking perhaps they were not needed and just added extra work and cost so I removed them from the models. if you feel they are needed I could put them back but I thought the 4 main mounting holes would be sufficient but let me know what you think.

Chris

On Sat, Dec 9, 2017 at 3:07 AM, Johansson-D notifications@github.com wrote:

Hi Chris_Annin. I just joined this "little" project. :) The M4 holes in the Base support part 1 and 2 are missing, or should one drill them? The M4 holes are shown in the BOM pdf on page 3.

File names: J1 base support spacer part 1 2017.09.18 J1 base support spacer part 2 2017.09.18

Best regards and THAN YOU for sharing this/ Dahniel

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Chris-Annin/AR2/issues/5, or mute the thread https://github.com/notifications/unsubscribe-auth/ATpgLaE74imChnLcsDO0DJ_ksFi4xx9_ks5s-mnwgaJpZM4Q8DHS .

Johansson-D commented 6 years ago

Hi Chris, thanks for a quick reply. Are you saying that the M4 screw are not needed? I would be glad if you could mail the files or put them up at the website again. Because then one has the option of chosing.

Best regards, Dahniel Johansson

On Dec 9, 2017 22:24, "Chris Annin" notifications@github.com wrote:

hello, I was thinking perhaps they were not needed and just added extra work and cost so I removed them from the models. if you feel they are needed I could put them back but I thought the 4 main mounting holes would be sufficient but let me know what you think.

Chris

On Sat, Dec 9, 2017 at 3:07 AM, Johansson-D notifications@github.com wrote:

Hi Chris_Annin. I just joined this "little" project. :) The M4 holes in the Base support part 1 and 2 are missing, or should one drill them? The M4 holes are shown in the BOM pdf on page 3.

File names: J1 base support spacer part 1 2017.09.18 J1 base support spacer part 2 2017.09.18

Best regards and THAN YOU for sharing this/ Dahniel

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Chris-Annin/AR2/issues/5, or mute the thread https://github.com/notifications/unsubscribe- auth/ATpgLaE74imChnLcsDO0DJ_ksFi4xx9_ks5s-mnwgaJpZM4Q8DHS .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Chris-Annin/AR2/issues/5#issuecomment-350506481, or mute the thread https://github.com/notifications/unsubscribe-auth/AgzRsqUFul-903m7mpIOL1H37yE6O5tfks5s-vp9gaJpZM4Q8DHS .

Johansson-D commented 6 years ago

Hi Chris. Did you put up the files somewhere? I feel that they are needed. Best regards, Dahniel

Chris-Annin commented 6 years ago

I believe if you go to Code, then click on commits and go to may 29th 2017 and click view repository at this point in time you should find the earlier print files.

https://github.com/Chris-Annin/AR2/tree/20a7b994f84574137bca8c4c3074bd3974aa6010

Johansson-D commented 6 years ago

I found them here: https://github.com/Chris-Annin/AR2/blob/fe274c6ada36cc75682504b6163ea55a67c506cc/AR2%20print%20files.zip

Thx Chris

Chris-Annin commented 6 years ago

updated design calls for (x2) 4mm dowels rather than wasted expense on many screws.