Chris-Annin
commented
6 years ago which files specifically do you see differences? I did make minor adjustments to the .stl files to accomodate for shrink issues especially on some of the bearing diameters but I left the step files unmodified for use in machining purposes - are you looking at the small differences for shrink or are you talking about the different files for the initial design with ecomonmy series motors and the spring assist. I am in the process of updating the design so the printed and aluminum are identical. I need to print and put together another printed robot - I am discontiuing use of the economy motors for J123 and also eliminating the spring I think depending if the J2 spindle can support load without spring assist but I need to print and test another robot. I will try to get this done as soon as I can and get all the files updated.
Chris
On Mon, Feb 12, 2018 at 8:20 AM, Knechtie notifications@github.com wrote:
Hi, could you also provide the STEP files for the 3D-printed version? I've noticed some differences between the .stl files of the 3D-printed version and the step files (aluminum version, I guess?).
Thank You!
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Chris-Annin/AR2/issues/9, or mute the thread https://github.com/notifications/unsubscribe-auth/ATpgLXjxo7-PGKlIflcqzmP-3yamgVRRks5tUGTagaJpZM4SCboY .
machinekoder
Hi, could you also provide the STEP files for the 3D-printed version? I've noticed some differences between the .stl files of the 3D-printed version and the step files (aluminum version, I guess?).
Thank You!