search

ChrisWag91 / Inkscape-Lasertools-Plugin

A simple plugin to convert inkscape vector graphics to Gcode for DIY laser engravers
GNU General Public License v3.0
38 stars 27 forks source link

LaserTools window too tall #18

Closed oilytin closed 2 years ago

oilytin commented 3 years ago

Hi the popup is too tall for my screen (1080p) i am unable to see or click the apply button. Windows 10, Inkscape 0.92 Thanks Anthony image

oilytin commented 3 years ago

not sure if this tab is the cause of the problem image

oilytin commented 3 years ago

upgraded to 1.0 and the problem is gone

ChrisWag91 commented 3 years ago

Hi, I tried to reproduce the issue in windows and linux in v0.92 without any luck. It displays as intended on my system:

image

But the issue seems to pop up in some installations. It is almost certainly caused by the debug text in your screenshot. According to the lasertools.inx file there should not be any text in front of the textboxes: image

Adding a space or a dash in there might fix the problem. If someone has a chance to test that, please let me know if it solved the problem.

oilytin commented 3 years ago

Before i moved to the 1.0 version i did try adding something in those quotes but it didnt seem to make any difference with the same output as above.

oilytin commented 3 years ago

I also tried the 32 and 64 bit .92 releases but that didn't make any difference either.

Lannert commented 3 years ago

Hi, i also had the problem with the tall windows (Inkscape 0.92, MacOSX). I added the spaces as recommended and everything is fine. Thank you very much for this plugin! It works very good and i enjoy it.

ChrisWag91 commented 3 years ago

Thanks for the Feedback. I'll add the spaces in master.