Closed rikvandersteen closed 1 year ago
The sch/brd files open fine. Are you sure your local files were properly cloned from git?
This is what I can see:
yes the are proberly cloned can you if possible sent me the 3 gerber files (the meter , addon , and remote) that would be verry helpfull thank you
What are your files sha-sums and sizes? Below are mine. Can you post yours?
ls -allh *.sch
-rw-r--r-- 1 1.7M Feb 18 11:45 6_channel_esp32_energy_meter.sch
-rw-r--r-- 1 1.1M Feb 18 11:45 6_channel_esp32_energy_meter_add-on.sch
-rw-r--r-- 1 122K Feb 6 20:00 6_channel_remote.sch
ls -allh *.brd
-rw-r--r-- 1 408K Feb 18 11:45 6_channel_esp32_energy_meter.brd
-rw-r--r-- 1 409K Feb 18 11:45 6_channel_esp32_energy_meter_add-on.brd
-rw-r--r-- 1 72K Feb 6 20:00 6_channel_remote.brd
sha256sum *.brd
35deda746f9961dd08c735d46e2f291d8f1bf4efde3d03f0b2587383172ce62d 6_channel_esp32_energy_meter.brd
69cdaad99e61140cdce5e5c0269944e3e960628cdd9e059a9ee8a10d0256957e 6_channel_esp32_energy_meter_add-on.brd
e86a60d9b7105e089e79f66f8ae5ff17c1a7a39bbab307fb9d7cc6e5155cf838 6_channel_remote.brd
sha256sum *.sch
2a6023082aea383277a7d66575dab7634dd4943533fb5e119c5752a5ffcf0232 6_channel_esp32_energy_meter.sch
193387096dce433dfaf05c84899caee2ffde81996a00a506214c58d903ddb7e1 6_channel_esp32_energy_meter_add-on.sch
d84772ee3e0509e569aec4f8186837aa21ff999bb6d52e04eafb36cc9cf8ceca 6_channel_remote.sch
It tells me library are not good. Can you send the 3 Gerber files. If possible
Maybe you should reinstall your EAGLE app... I do not have much experience with EAGLE, so check those files before using them elsewhere.
6_channel_esp32_energy_meter_2022-02-24.zip 6_channel_esp32_energy_meter_add-on_2022-02-24.zip 6_channel_remote_2022-02-24.zip .
Thank you. I have checked your files. And the give.the same error on jlcpcb.com. When I want to order them
Thank you. I have checked your files. And the give.the same error on jlcpcb.com. When I want to order them
When you are exporting via the CAM processor, is it set to Gerber RS-274X, and "Export as ZIP"? You can also load their cam file located here: https://raw.githubusercontent.com/JLCPCBofficial/jlcpcb-eagle/master/cam/jlcpcb_2_layer_v9.cam
hello can annybody help me i tried to make the gerber files of the 3 pcb but eagle showing corrupted files can annybody send me the 3 gerber files of the pcb thank you