search

CircuitSetup / Split-Single-Phase-Energy-Meter

Split Single-phase Energy Meter
https://www.crowdsupply.com/circuitsetup/split-single-phase-energy-meter
MIT License
261 stars 57 forks source link

Any advice for an european transformer brand? #54

Closed wouldgo closed 3 years ago

wouldgo commented 3 years ago

Hi, I purchased yesterday the circuit from tindie and I was wandering stores and ebay searching an european plug (CEE 7/4, CEE 7/16 or CEI 23-16 from here) transformer but I then thought that maybe there are some suggested brands already.

Is there anyone that already had an installation with a transformer of that kind? Thanks a lot

Dario

CircuitSetup commented 3 years ago

My apologies for the delay. There are some recommended AC power transformers with european plugs listed here.

In general, anything that brings down the voltage to between 9 and 12 VAC and outputs 1000mA will work with the meter.

wouldgo commented 3 years ago

Hi,

no problems at all. At the moment I've not yet found anything but after your advices I maybe found something with the rigth plug: as far I undestand these specs are fitting the requirements.

Am I rigth?

Thanks again Dario

wouldgo commented 3 years ago

As reference that transformer is 100% fitting the need.