search

CircuitSetup / Split-Single-Phase-Energy-Meter

Split Single-phase Energy Meter
https://www.crowdsupply.com/circuitsetup/split-single-phase-energy-meter
MIT License
261 stars 57 forks source link

Rebooting problem using emonESP with ESP32 with Arduino IDE #68

Closed albnar closed 2 years ago

albnar commented 2 years ago

After uploading the src.ino code from emonESP into a Espressif ESP32-Wroom-32 board using Arduino IDE, the ESP32 is reloading continuosly. Before loading the code it broadcast its WiFi name, but after uploading the code it disappered and reboots continuosly. Here is the text in serial monitor:

16:34:55.384 -> Rebooting... 16:34:55.384 -> ets Jun 8 2016 00:22:57 16:34:55.384 -> 16:34:55.384 -> rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) 16:34:55.384 -> configsip: 0, SPIWP:0xee 16:34:55.384 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 16:34:55.384 -> mode:DIO, clock div:1 16:34:55.443 -> load:0x3fff0018,len:4 16:34:55.443 -> load:0x3fff001c,len:1216 16:34:55.443 -> ho 0 tail 12 room 4 16:34:55.443 -> load:0x40078000,len:10944 16:34:55.443 -> load:0x40080400,len:6388 16:34:55.443 -> entry 0x400806b4 16:34:57.271 -> Starting AP 16:34:57.365 -> WiFi interface ready 16:34:57.365 -> WiFi client started

I tried with three new brand boards. The problem appears in every one of the boards. In the instructions this issue ist mencioned and a total erase of RAM flash is recommended. It did not help.

I would appreciate any help. Best regards

CircuitSetup commented 2 years ago

Try disabling the watchdog timer here.

albnar commented 2 years ago

Hi John, thank you very much for your prompt reply. Your recommendation was very helpful. Now I get the WiFi Name and I was able to connect to him. If I try to navigate to 192.168.4.1 I get this: I am using my Laptop to connect WiFi.

/home.html not found, have you flashed the SPIFFS?

I can not go further:

[image: image.png]

I read the Issue #69: SPIFFS log error en version 3.0.0 #69. I compiled with arduino IDE. It seems to be for Phyton. Sorry, but I still need your help. I do not know what to do with this. What have I to do?

Best regards,

Alberto

On Wed, May 25, 2022 at 10:56 AM John @.***> wrote:

Try disabling the watchdog timer here. https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/blob/e1790d1bc7859581c94a0c7407c2ae6370ee8dd2/Software/EmonESP/src/emonesp.h#L38

— Reply to this email directly, view it on GitHub https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/issues/68#issuecomment-1137470410, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIKGYC23ZTY42YXSWU27RW3VLZEUDANCNFSM5W3AZIZA . You are receiving this because you authored the thread.Message ID: @.*** com>

--

albnar commented 2 years ago

Hi John, maybe this information is important for you: [image: image.png]

On Wed, May 25, 2022 at 6:03 PM Alberto Naranjo @.***> wrote:

Hi John, thank you very much for your prompt reply. Your recommendation was very helpful. Now I get the WiFi Name and I was able to connect to him. If I try to navigate to 192.168.4.1 I get this: I am using my Laptop to connect WiFi.

/home.html not found, have you flashed the SPIFFS?

I can not go further:

[image: image.png]

I read the Issue #69: SPIFFS log error en version 3.0.0 #69. I compiled with arduino IDE. It seems to be for Phyton. Sorry, but I still need your help. I do not know what to do with this. What have I to do?

Best regards,

Alberto

On Wed, May 25, 2022 at 10:56 AM John @.***> wrote:

Try disabling the watchdog timer here. https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/blob/e1790d1bc7859581c94a0c7407c2ae6370ee8dd2/Software/EmonESP/src/emonesp.h#L38

— Reply to this email directly, view it on GitHub https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/issues/68#issuecomment-1137470410, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIKGYC23ZTY42YXSWU27RW3VLZEUDANCNFSM5W3AZIZA . You are receiving this because you authored the thread.Message ID: @.*** .com>

--

--

albnar commented 2 years ago

Hi John, I still try to get this application running. During compiling in verbose mode option I see following text regarding SPIFFS


Compiling library "SPIFFS"
"C:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-97-gc752ad5-5.2.0/bin/xtensa-esp32-elf-g++"
-DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\""
-DHAVE_CONFIG_H -DGCC_NOT_5_2_0=0 -DWITH_POSIX
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/config"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/app_trace"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/app_update"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/asio"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/bootloader_support"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/bt"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/coap"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/console"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/driver"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/efuse"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-tls"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_adc_cal"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_event"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_http_client"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_http_server"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_https_ota"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_https_server"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_ringbuf"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_websocket_client"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/espcoredump"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/ethernet"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/expat"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/fatfs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/freemodbus"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/freertos"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/heap"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/idf_test"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/jsmn"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/json"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/libsodium"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/log"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/lwip"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mbedtls"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mdns"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/micro-ecc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mqtt"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/newlib"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/nghttp"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/nvs_flash"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/openssl"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/protobuf-c"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/protocomm"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/pthread"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/sdmmc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/smartconfig_ack"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/soc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/spi_flash"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/spiffs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/tcp_transport"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/tcpip_adapter"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/ulp"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/unity"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/vfs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wear_levelling"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wifi_provisioning"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wpa_supplicant"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/xtensa-debug-module"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-face"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp32-camera"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-face"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/fb_gfx"
-std=gnu++11 -Os -g3 -Wpointer-arith -fexceptions -fstack-protector
-ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls
-nostdlib -w -Wno-error=maybe-uninitialized -Wno-error=unused-function
-Wno-error=unused-but-set-variable -Wno-error=unused-variable
-Wno-error=deprecated-declarations -Wno-unused-parameter
-Wno-unused-but-set-parameter -Wno-missing-field-initializers
-Wno-sign-compare -fno-rtti -MMD -c -DF_CPU=240000000L -DARDUINO=10819
-DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\""
"-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\cores\\esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\variants\\esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\EEPROM\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\WiFi\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\ESPmDNS\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\FS\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPIFFS\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\AsyncTCP-master\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\ESPAsyncWebServer-master\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\ArduinoOTA\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\Update\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\async-mqtt-client-develop\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\WiFiClientSecure\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPI\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\ATM90E32"
"C:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPIFFS\\src\\SPIFFS.cpp"
-o
"C:\\Users\\ANC\\AppData\\Local\\Temp\\arduino_build_289904\\libraries\\SPIFFS\\SPIFFS.cpp.o"

I suppose SPIFFS is in flash.
I tried unsuccessfully every option I found in  Partition scheme in Tools
dealing with SPIFFS.
I can not go further.
I would appreciate it if you can help me.
Best regards

On Wed, May 25, 2022 at 6:14 PM Alberto Naranjo ***@***.***>
wrote:

> Hi John,
> maybe this information is important for you:
> [image: image.png]
>
>
> On Wed, May 25, 2022 at 6:03 PM Alberto Naranjo ***@***.***>
> wrote:
>
>> Hi John,
>> thank you very much for your prompt reply.
>> Your recommendation was very helpful.
>> Now I get the WiFi Name and I was able to connect to him.  If I try to
>> navigate  to 192.168.4.1 I get this:  I am using my Laptop to connect WiFi.
>>
>> /home.html not found, have you flashed the SPIFFS?
>>
>> I can not go further:
>>
>> [image: image.png]
>>
>> I read the Issue #69: SPIFFS log error en version 3.0.0 #69. I compiled
>> with arduino IDE. It seems to be for Phyton.
>> Sorry, but I still need your help.  I do not know what to do with this.
>>  What have I to do?
>>
>> Best regards,
>>
>> Alberto
>>
>> On Wed, May 25, 2022 at 10:56 AM John ***@***.***> wrote:
>>
>>> Try disabling the watchdog timer here.
>>> <https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/blob/e1790d1bc7859581c94a0c7407c2ae6370ee8dd2/Software/EmonESP/src/emonesp.h#L38>
>>>
>>> —
>>> Reply to this email directly, view it on GitHub
>>> <https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/issues/68#issuecomment-1137470410>,
>>> or unsubscribe
>>> <https://github.com/notifications/unsubscribe-auth/AIKGYC23ZTY42YXSWU27RW3VLZEUDANCNFSM5W3AZIZA>
>>> .
>>> You are receiving this because you authored the thread.Message ID:
>>> <CircuitSetup/Split-Single-Phase-Energy-Meter/issues/68/1137470410@
>>> github.com>
>>>
>>
>>
>> --
>>
>>
>>
>
> --
>
>
>

--
albnar commented 2 years ago

by the way in serial monitor I see following textevery second: 14:34:36.009 -> Sys Status: S0:0x1770 S1:0xfa00 14:34:36.009 -> Meter Status: E0:0x370 E1:0x7200 14:34:36.009 -> . 14:34:37.003 -> Sys Status: S0:0x1770 S1:0xfa00 14:34:37.003 -> Meter Status: E0:0x370 E1:0x7200 14:34:37.003 -> .

On Fri, May 27, 2022 at 2:31 PM Alberto Naranjo @.***> wrote:

Hi John, I still try to get this application running. During compiling in verbose mode option I see following text regarding SPIFFS


Compiling library "SPIFFS"
"C:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-97-gc752ad5-5.2.0/bin/xtensa-esp32-elf-g++"
-DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\""
-DHAVE_CONFIG_H -DGCC_NOT_5_2_0=0 -DWITH_POSIX
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/config"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/app_trace"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/app_update"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/asio"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/bootloader_support"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/bt"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/coap"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/console"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/driver"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/efuse"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-tls"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_adc_cal"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_event"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_http_client"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_http_server"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_https_ota"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_https_server"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_ringbuf"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_websocket_client"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/espcoredump"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/ethernet"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/expat"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/fatfs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/freemodbus"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/freertos"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/heap"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/idf_test"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/jsmn"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/json"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/libsodium"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/log"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/lwip"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mbedtls"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mdns"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/micro-ecc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mqtt"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/newlib"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/nghttp"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/nvs_flash"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/openssl"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/protobuf-c"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/protocomm"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/pthread"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/sdmmc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/smartconfig_ack"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/soc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/spi_flash"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/spiffs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/tcp_transport"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/tcpip_adapter"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/ulp"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/unity"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/vfs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wear_levelling"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wifi_provisioning"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wpa_supplicant"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/xtensa-debug-module"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-face"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp32-camera"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-face"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/fb_gfx"
-std=gnu++11 -Os -g3 -Wpointer-arith -fexceptions -fstack-protector
-ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls
-nostdlib -w -Wno-error=maybe-uninitialized -Wno-error=unused-function
-Wno-error=unused-but-set-variable -Wno-error=unused-variable
-Wno-error=deprecated-declarations -Wno-unused-parameter
-Wno-unused-but-set-parameter -Wno-missing-field-initializers
-Wno-sign-compare -fno-rtti -MMD -c -DF_CPU=240000000L -DARDUINO=10819
-DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\""
"-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\cores\\esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\variants\\esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\EEPROM\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\WiFi\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\ESPmDNS\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\FS\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPIFFS\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\AsyncTCP-master\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\ESPAsyncWebServer-master\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\ArduinoOTA\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\Update\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\async-mqtt-client-develop\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\WiFiClientSecure\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPI\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\ATM90E32"
"C:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPIFFS\\src\\SPIFFS.cpp"
-o
"C:\\Users\\ANC\\AppData\\Local\\Temp\\arduino_build_289904\\libraries\\SPIFFS\\SPIFFS.cpp.o"

I suppose SPIFFS is in flash.
I tried unsuccessfully every option I found in  Partition scheme in Tools
dealing with SPIFFS.
I can not go further.
I would appreciate it if you can help me.
Best regards

On Wed, May 25, 2022 at 6:14 PM Alberto Naranjo ***@***.***>
wrote:

> Hi John,
> maybe this information is important for you:
> [image: image.png]
>
>
> On Wed, May 25, 2022 at 6:03 PM Alberto Naranjo ***@***.***>
> wrote:
>
>> Hi John,
>> thank you very much for your prompt reply.
>> Your recommendation was very helpful.
>> Now I get the WiFi Name and I was able to connect to him.  If I try to
>> navigate  to 192.168.4.1 I get this:  I am using my Laptop to connect WiFi.
>>
>> /home.html not found, have you flashed the SPIFFS?
>>
>> I can not go further:
>>
>> [image: image.png]
>>
>> I read the Issue #69: SPIFFS log error en version 3.0.0 #69. I compiled
>> with arduino IDE. It seems to be for Phyton.
>> Sorry, but I still need your help.  I do not know what to do with this.
>>  What have I to do?
>>
>> Best regards,
>>
>> Alberto
>>
>> On Wed, May 25, 2022 at 10:56 AM John ***@***.***> wrote:
>>
>>> Try disabling the watchdog timer here.
>>> <https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/blob/e1790d1bc7859581c94a0c7407c2ae6370ee8dd2/Software/EmonESP/src/emonesp.h#L38>
>>>
>>> —
>>> Reply to this email directly, view it on GitHub
>>> <https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/issues/68#issuecomment-1137470410>,
>>> or unsubscribe
>>> <https://github.com/notifications/unsubscribe-auth/AIKGYC23ZTY42YXSWU27RW3VLZEUDANCNFSM5W3AZIZA>
>>> .
>>> You are receiving this because you authored the thread.Message ID:
>>> <CircuitSetup/Split-Single-Phase-Energy-Meter/issues/68/1137470410@
>>> github.com>
>>>
>>
>>
>> --
>>
>>
>>
>
> --
>
>
>

--

--

albnar commented 2 years ago

Problem solved following this case:

Adafruit ESP32 Feather hangs at init when calling SPIFFS.begin() #888 best regards. Alberto

On Fri, May 27, 2022 at 2:37 PM Alberto Naranjo @.***> wrote:

by the way in serial monitor I see following textevery second: 14:34:36.009 -> Sys Status: S0:0x1770 S1:0xfa00 14:34:36.009 -> Meter Status: E0:0x370 E1:0x7200 14:34:36.009 -> . 14:34:37.003 -> Sys Status: S0:0x1770 S1:0xfa00 14:34:37.003 -> Meter Status: E0:0x370 E1:0x7200 14:34:37.003 -> .

On Fri, May 27, 2022 at 2:31 PM Alberto Naranjo @.***> wrote:

Hi John, I still try to get this application running. During compiling in verbose mode option I see following text regarding SPIFFS


Compiling library "SPIFFS"
"C:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\1.22.0-97-gc752ad5-5.2.0/bin/xtensa-esp32-elf-g++"
-DESP_PLATFORM "-DMBEDTLS_CONFIG_FILE=\"mbedtls/esp_config.h\""
-DHAVE_CONFIG_H -DGCC_NOT_5_2_0=0 -DWITH_POSIX
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/config"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/app_trace"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/app_update"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/asio"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/bootloader_support"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/bt"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/coap"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/console"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/driver"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/efuse"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-tls"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_adc_cal"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_event"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_http_client"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_http_server"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_https_ota"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_https_server"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_ringbuf"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp_websocket_client"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/espcoredump"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/ethernet"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/expat"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/fatfs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/freemodbus"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/freertos"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/heap"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/idf_test"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/jsmn"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/json"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/libsodium"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/log"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/lwip"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mbedtls"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mdns"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/micro-ecc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/mqtt"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/newlib"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/nghttp"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/nvs_flash"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/openssl"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/protobuf-c"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/protocomm"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/pthread"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/sdmmc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/smartconfig_ack"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/soc"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/spi_flash"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/spiffs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/tcp_transport"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/tcpip_adapter"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/ulp"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/unity"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/vfs"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wear_levelling"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wifi_provisioning"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/wpa_supplicant"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/xtensa-debug-module"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-face"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp32-camera"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/esp-face"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6/tools/sdk/include/fb_gfx"
-std=gnu++11 -Os -g3 -Wpointer-arith -fexceptions -fstack-protector
-ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls
-nostdlib -w -Wno-error=maybe-uninitialized -Wno-error=unused-function
-Wno-error=unused-but-set-variable -Wno-error=unused-variable
-Wno-error=deprecated-declarations -Wno-unused-parameter
-Wno-unused-but-set-parameter -Wno-missing-field-initializers
-Wno-sign-compare -fno-rtti -MMD -c -DF_CPU=240000000L -DARDUINO=10819
-DARDUINO_ESP32_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\""
"-DARDUINO_VARIANT=\"esp32\"" -DESP32 -DCORE_DEBUG_LEVEL=0
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\cores\\esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\variants\\esp32"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\EEPROM\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\WiFi\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\ESPmDNS\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\FS\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPIFFS\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\AsyncTCP-master\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\ESPAsyncWebServer-master\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\ArduinoOTA\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\Update\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\async-mqtt-client-develop\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\WiFiClientSecure\\src"
"-IC:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPI\\src"
"-IC:\\Users\\ANC\\Documents\\Arduino\\libraries\\ATM90E32"
"C:\\Users\\ANC\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\1.0.6\\libraries\\SPIFFS\\src\\SPIFFS.cpp"
-o
"C:\\Users\\ANC\\AppData\\Local\\Temp\\arduino_build_289904\\libraries\\SPIFFS\\SPIFFS.cpp.o"

I suppose SPIFFS is in flash.
I tried unsuccessfully every option I found in  Partition scheme in Tools
dealing with SPIFFS.
I can not go further.
I would appreciate it if you can help me.
Best regards

On Wed, May 25, 2022 at 6:14 PM Alberto Naranjo ***@***.***>
wrote:

> Hi John,
> maybe this information is important for you:
> [image: image.png]
>
>
> On Wed, May 25, 2022 at 6:03 PM Alberto Naranjo ***@***.***>
> wrote:
>
>> Hi John,
>> thank you very much for your prompt reply.
>> Your recommendation was very helpful.
>> Now I get the WiFi Name and I was able to connect to him.  If I try to
>> navigate  to 192.168.4.1 I get this:  I am using my Laptop to connect WiFi.
>>
>> /home.html not found, have you flashed the SPIFFS?
>>
>> I can not go further:
>>
>> [image: image.png]
>>
>> I read the Issue #69: SPIFFS log error en version 3.0.0 #69. I compiled
>> with arduino IDE. It seems to be for Phyton.
>> Sorry, but I still need your help.  I do not know what to do with
>> this.   What have I to do?
>>
>> Best regards,
>>
>> Alberto
>>
>> On Wed, May 25, 2022 at 10:56 AM John ***@***.***> wrote:
>>
>>> Try disabling the watchdog timer here.
>>> <https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/blob/e1790d1bc7859581c94a0c7407c2ae6370ee8dd2/Software/EmonESP/src/emonesp.h#L38>
>>>
>>> —
>>> Reply to this email directly, view it on GitHub
>>> <https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/issues/68#issuecomment-1137470410>,
>>> or unsubscribe
>>> <https://github.com/notifications/unsubscribe-auth/AIKGYC23ZTY42YXSWU27RW3VLZEUDANCNFSM5W3AZIZA>
>>> .
>>> You are receiving this because you authored the thread.Message ID:
>>> <CircuitSetup/Split-Single-Phase-Energy-Meter/issues/68/1137470410@
>>> github.com>
>>>
>>
>>
>> --
>>
>>
>>
>
> --
>
>
>

--

--

--

CircuitSetup commented 2 years ago

Glad you were able to figure this out!