search

Classy-Closets / Snap-Updates

Snap-Updates
6 stars 0 forks source link

Dovetail Drawer Box Option #61

Open TedCC1209 opened 4 years ago

TedCC1209 commented 4 years ago

Need to add the option for dovetail drawer boxes. Sizing of dovetail drawer boxes is dependent on the drawer slides used so the drawer slide options available in SNaP need to be fleshed out before we can really start on this.

TedCC1209 commented 3 years ago

@CCDevNelson Mark, I am putting together instructions for Teddy re: sizing of DT boxes depending on the selected slides, etc. The box parts will not be cut like other closet parts since the sides/fronts/backs come in rips that we cut separately. However, I am assuming you will want the info to track with our other softwares? Can you confirm that you need the DT box pieces separated out for those purposes and we can't just put the overall dimensions of the DT box on a single label for a DT box?

CCDevNelson commented 3 years ago

@TedClassy1209 Ted, I'm thinking we could probably get away with just a line entry with the Dovetail Drawer Box Category that I can trigger off of, and then the overall dimensions (but that would need to include the Height as well). I'll need to verify this with the BC people at tomorrow's meeting, but I would think that even if they need parts broken out, I can give that to them in the csv files I create from the XML for them, using a basic formula for that, I think (maybe).

TedCC1209 commented 3 years ago

@CCDevNelson Hi Mark, were you able to verify what you need for dovetail drawer boxes at your meeting with the BC folks last week? Teddy is currently working on this issue so he needs to know what info needs to be exported. Thanks, Ted

CCDevNelson commented 3 years ago

@TedCC1209 This is still VERY hazy and I'm not sure BC has a true grasp around what they are going to be doing when it comes to the Dovetail Drawer boxes and for that matter, the 5-piece Doors.

I'm going to say we need to have part information the same as the information you are passing on a melamine drawer box. The 5-piece Doors are a little bit more involved and may need much more than that, so start with the Dovetails and I'll get you more info on the 5-piece doors.

CCDevNelson commented 3 years ago

@TedCC1209 I have some new category numbers for you:

1228 | Drawer Box - Baltic Birch 1229 | Drawer Front - BB 1230 | Drawer Bottom - BB 1231 | Drawer Side - BB 1232 | Drawer Back - BB

I do not have information for you on the 5-piece doors yet, but will try and get that finalized tomorrow.

Mark

ClassyTeddy commented 3 years ago

This is ready for testing on the Adding-Dovetail-Drawers branch. Currently, there is no physical change in SNaP when the Dovetail Drawer option is selected in the drawers prompt menu. All it does is change the export so that the catnum is correct for all the individual drawer box parts, as well as change which category the slide gets exported from.

TedCC1209 commented 3 years ago

Teddy, can we have the prompt say "Dovetail Drawer Boxes" rather than just "Dovetail Drawers"? Otherwise it looks good and I like the placement of the prompt. When I get back into the office (hopefully later this week, but perhaps early next week) I will explain dovetail drawer box sizing and slide selection with you so we can get that nailed down. Thanks, Ted