Open hub3202 opened 1 year ago
Hi, I haven't used telemetry modules so I'm not sure what the problem could be. Did you have telemetry working before the upgrade?
No i didnt
Sent from Outlook for Androidhttps://aka.ms/AAb9ysg
From: Cleric-K @.> Sent: Tuesday, February 28, 2023 3:13:15 PM To: Cleric-K/FlySky-i6X_Firmware_BugFix @.> Cc: hub3202 @.>; Author @.> Subject: Re: [Cleric-K/FlySky-i6X_Firmware_BugFix] hi there i have just updated my i6 radio to 10 channels and im trying to use various telemetary modules on it the only one showing is votage others are not coming on ie especially the altitude my freind who has...
Hi, I haven't used telemetry modules so I'm not sure what the problem could be. Did you have telemetry working before the upgrade?
— Reply to this email directly, view it on GitHubhttps://github.com/Cleric-K/FlySky-i6X_Firmware_BugFix/issues/17#issuecomment-1448359912, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A6FX7UCIVOMBOAFONBPTYTTWZYIYXANCNFSM6AAAAAAVKYYDHU. You are receiving this because you authored the thread.Message ID: @.***>
@hub3202
RE: "i have just updated my i6 radio to 10 channels"
The OEM i6X firmware (like this bug fix one) enables you to easily toggle on (or off) channels 6, 7, 8, 9, 10 via the 'System menu>Aux switches'. If Telemetry devices are plugged into your flysky RC receiver, your i6x transmitter should detect those when you are successfully bound...and you can then select them via System>RX Setup>Choose Sensors. Their value will then be displayed on the main screen.
youtube channels like "RC with Adam" have a plenty of very useful tutorials that should help you to figure out how to do what you need with the Flysky I6x...to start, I suggest you check out this play list:
https://www.youtube.com/playlist?list=PLDnffNsiQx6PvFV7pcBiRzRJn2vgJkgcG
Depends on what you need. For the compilation of the patch I used Notepad++ to write the code and the standard gcc-arm toolchain for building. If you want to write normal stm32 projects I use https://platformio.org/
IDA 7.0
http://www.angusj.com/resourcehacker/ Although I dumped it directly from the transmitter, by connecting with ST-LINK. I used resourcehacker to replace the firmware in updater.exe with the patched.
It's simply blackbox data from Betaflight FC. You need either
RC_INTERPOLATION
orRC_SMOOTHING
debug mode. See https://github.com/betaflight/betaflight/wiki/Debug-ModesFS-I6X uses USB communication. FS-I6 uses UART![image](https://user-images.githubusercontent.com/9365881/121151551-2395f800-c84d-11eb-8eaa-1c3331315909.png)
TX and RX are for FS-I6's UART. D+/- are for FS-I6X's USB.
_Originally posted by @Cleric-K in https://github.com/Cleric-K/FlySky-i6X_Firmware_BugFix/issues/12#issuecomment-856578185_