search

Cleric-K / vJoySerialFeeder

Feed Virtual Joystick driver with data from a serial port
GNU General Public License v3.0
252 stars 55 forks source link

OPtic 6 to corona cr8d and Nano not getting signal to VJoy #80

Open Mattjames76 opened 4 months ago

Mattjames76 commented 4 months ago

I first tried with an FTDI but then i read about PPM signal which my transmitter is. So i bought a nano and flashed with the ppm to ibus script.

I get no signal whatsover to Vjoy. Tried all the protocols. I even tried EEPROM - Clear.

At a complete loss.

Also my TX light was solid with EEPROM but with PPM to IBUS only power light is on.

Cleric-K commented 4 months ago

Are you sure that you have PPM signal at all? Have you tested this receiver in some way?

Mattjames76 commented 4 months ago

Yes it works.  Binder to my spitfire.  No issues

Sent from Yahoo Mail on Android

On Wed., 28 Feb. 2024 at 1:02 p.m., @.***> wrote:

Are you sure that you have PPM signal at all? Have you tested this receiver in some way?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>

Mattjames76 commented 4 months ago

I've tested the corona before and after to see if i fried the tx. It still binds and I still get throttle, rudder and elevator movement.

From what Ive read the cr8d puts out a ppm signal? so I'm at a loss on what i could be. should I get another nano?

Mattjames76 commented 4 months ago

Ended up getting a flysky. Everything works

Cleric-K commented 4 months ago

OK, sorry that I couldn't be of much help but it is difficult to debug these things from a distance.

On the bright side, using real digital IBUS protocol is much more responsive. PPM introduces some delay, so the step to digital would have been needed at some point anyway.

Mattjames76 commented 4 months ago

No worries. I'm stubborn and really wanted to use the optic. Spent time upgrading it to 2.4. It was only used once 20 years ago. But happy with flysky now.