search

ClockSelect / myevic

This is myevic Custom Firmware.
GNU General Public License v3.0
299 stars 101 forks source link

RX200s and 25R batt usb charging issue #269

Closed userdsp closed 7 years ago

userdsp commented 7 years ago

One of my batteries was droped to 1.0 volts while mod was charged over usb! The wast one under the door. The other two batteries have 3.56v and 3,48v.

userdsp commented 7 years ago

That was the first thing I did. The volmeter also showed 1 volt.

ClockSelect commented 7 years ago

What makes me suspicious is that if the firmware had such an issue I'd already have tons of issues opened on that subject since we have plenty of RX200S users.

Is the issue reproducible (without letting it go down to 1v - it'd kill the battery)? Do you actually see an unbabalance growing on the charge screen while charging via USB? And does the box work fine on this regard with the stock firmware?

userdsp commented 7 years ago

This issue was happened after flashing your previous firmware. I don't have the same problem with the last one. All batteries had 3.5 volts before I start charge them. I hope this issue is stick to the previous firmware version! This is the first issue like this for me and I never have those problems before (with the stok firmware). I own this mod from 3 month's ago.