then identify the LB/NLB/LBS/NLBS lines which are parallel to hallway hatch and within a 5" distance from hallway hatch. All these lines should be identified even before Extending & trimming process, and if
a) any particular line is in East-West direction & if it is present above hallway hatch then the "Horizontal panel direction" parameter should be filled with "U" value
b) any particular line is in East-West direction & if it is present below hallway hatch then the "Horizontal panel direction" parameter should be filled with "D" value
c) any particular line is in North-South direction & if it is present to the right side of hallway hatch then the "Vertical panel direction" parameter should be filled with "R" value
d) any particular line is in North-South direction & if it is present to the left side of hallway hatch then the "Vertical panel direction" parameter should be filled with "L" value
& after panel placement
e) In lines of insulation, fire or any line with both side panels, delete the panel present on the hallway side.
If Panel @ Hallway condition is shown as no,
i. then delete the panel if it is only on any one side of the wall line present beside the hallway,
ii. if the line is of fire or insulation type or has both sides panel on it, then the panel should be deleted only on hallway side.
(This is old requirement only, but we thought of writing it after hallway add-in is ready. As hallway add-in got failed, this got stopped abruptly)
Panel @ Hallway Conditions:
then identify the LB/NLB/LBS/NLBS lines which are parallel to hallway hatch and within a 5" distance from hallway hatch. All these lines should be identified even before Extending & trimming process, and if
a) any particular line is in East-West direction & if it is present above hallway hatch then the "Horizontal panel direction" parameter should be filled with "U" value
b) any particular line is in East-West direction & if it is present below hallway hatch then the "Horizontal panel direction" parameter should be filled with "D" value
c) any particular line is in North-South direction & if it is present to the right side of hallway hatch then the "Vertical panel direction" parameter should be filled with "R" value
d) any particular line is in North-South direction & if it is present to the left side of hallway hatch then the "Vertical panel direction" parameter should be filled with "L" value
& after panel placement
e) In lines of insulation, fire or any line with both side panels, delete the panel present on the hallway side.
i. then delete the panel if it is only on any one side of the wall line present beside the hallway,
ii. if the line is of fire or insulation type or has both sides panel on it, then the panel should be deleted only on hallway side.
(This is old requirement only, but we thought of writing it after hallway add-in is ready. As hallway add-in got failed, this got stopped abruptly)