ColdHeat / iclass

Tool to read and write iclass cards without the master key
https://blog.kchung.co/reverse-engineering-hid-iclass-master-keys/
103 stars 37 forks source link

Run time issue #15

Open sajjadafridi opened 5 years ago

sajjadafridi commented 5 years ago

Hi, I am finding this error when I test iclass tag (HID 5321) although it is already added and connected. Faild: the omnikey can not be found!

gunkpunk commented 5 years ago

I had a similar issue using the same reader. My issue was that I wasn't using the right sequence. Here is the sequence that works for me: 1) Plug reader 2) Scan iclass tag 3) issue iclass.exe read command. Before I was doing the sequence above in the following order 1-3-2 and I would get the FAIL: Could not find OMNIKEY Reader. Good luck!

sajjadafridi commented 5 years ago

Thanks, i did follow your step now i get the following issue where read the device. Error: Authentication failed

gunkpunk commented 5 years ago

Did you try reading the credential using ContactlessDemoVC.exe?

sajjadafridi commented 5 years ago

ok let me check this.

On Tue, Oct 15, 2019 at 7:48 AM gunkpunk notifications@github.com wrote:

Did you try reading the credential using ContactlessDemoVC.exe?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ColdHeat/iclass/issues/15?email_source=notifications&email_token=AHNJIF5ODHVT2QNLFPMJLQDQOUVQ7A5CNFSM4I5O5PX2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEBHHF5Q#issuecomment-542012150, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHNJIF7HV5ZZ6XF4CURYCWLQOUVQ7ANCNFSM4I5O5PXQ .