onmove 510 firmware 2.10 - No device found

ColinPitrat / kalenji-gps-watch-reader

A tool to import data from some Kalenji running watches

GNU General Public License v3.0

30 stars 11 forks source link

onmove 510 firmware 2.10 - No device found #17

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago

I followed the install steps for onmove 510, but cannot get connected, always 
get no device found.

The watch was identified as STM32 MAss storage.
Could the firmware upgrade to 2.10 be the reason ?

Dieter

Original issue reported on code.google.com by dieter.d...@gmail.com on 2 Apr 2014 at 9:24

GoogleCodeExporter commented 9 years ago

Hello,

you can try to skip autodetection for your watch by using the option -D 
OnMove710 on command line or if you prefer, the following line your 
.kalenji_readerrc:
device=OnMove710

Can you give me the line corresponding to your watch in the output of lsusb ?

Regards,
Colin

Original comment by colin.pi...@gmail.com on 3 Apr 2014 at 6:42

Changed state: Accepted

GoogleCodeExporter commented 9 years ago

[deleted comment]

GoogleCodeExporter commented 9 years ago

I improved FAQ with this information:
https://code.google.com/p/kalenji-gps-watch-reader/wiki/FAQ#No_known_USB_device_
found

And updated device information in:
https://code.google.com/p/kalenji-gps-watch-reader/wiki/ConfigurationFile#Device
_type

Original comment by colin.pi...@gmail.com on 3 Apr 2014 at 7:08

GoogleCodeExporter commented 9 years ago

I tried the option -D OnMove710 but now get Unknown device

I am using windows and the watch shows up in windows as "USB mass storage" 
device.

Original comment by dieter.d...@gmail.com on 3 Apr 2014 at 5:39

GoogleCodeExporter commented 9 years ago

Hi,
Attached a few screenshot from all drivers and the output error after using the 
option -D.

System is Windows 7 - 64BIT, but tried on WinXP too with same result :(

Appreciate your help very much as I really want to get this great program work 
as the geonaute software does not allow me to export data.

Dieter

Original comment by dieter.d...@gmail.com on 3 Apr 2014 at 10:17

Attachments:

screenshots.png

GoogleCodeExporter commented 9 years ago

I tried an "lsusb" in linux and this is the output (Device 005 is the watch)

Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 005: ID 283e:0007
Bus 001 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle 
(HCI mode)

Original comment by dieter.d...@gmail.com on 3 Apr 2014 at 10:30

GoogleCodeExporter commented 9 years ago

Hello,

which version of kalenji_reader do you use ? Did you build it from SVN or do 
you use a tar from download section ? Unfortunately, downloads feature has been 
deprecated by Google Code and I can't create new ones so they are quite old. I 
just checked and they don't even contain OnMove710 device. 
I have on my todo list to replace it by a wiki page !

Regards,
Colin

Original comment by colin.pi...@gmail.com on 4 Apr 2014 at 9:51

GoogleCodeExporter commented 9 years ago

I updated the download section and uploaded a version 4.7 up to date.
It should work.

Regards,
Colin

Original comment by colin.pi...@gmail.com on 4 Apr 2014 at 1:55

Changed state: Fixed

GoogleCodeExporter commented 9 years ago

Original comment by colin.pi...@gmail.com on 4 Apr 2014 at 9:38

Changed state: Verified