Open WildcardCooper opened 1 year ago
Tensuko
commented
1 year ago The lift is intended and the chaff needs to be filled inside the bunker, at the start. Everything infront of it can't be worked on as we have some kind initialisation of the shield. If we would move this further out, we will have space problems with tighter areas, that is not our intention ofc.
WildcardCooper
commented
1 year ago 
It doesn't matter where the chaff is, since the bump is created after first interaction with the chaff. There is screen of worker creating the bump in the middle of silo.
And this is the aftermath of the first bump, tractor is long and while coming from the bump down, it pushes the leveler down causing more bumps, sometimes it makes the tractor stuck.
It is happening always after the 1st interaction with the chaff, not in front or at the start of bunker silo.
Tensuko
commented
1 year ago The problem is if the don't lift the shield sometimes, it gets stuck at the end and get other strange behaviour. So the pushing have to go on and on untill the bumps are gone and they should be gone after a while. We check if we can improove it further.
Spyrootjuh
commented
1 year ago Hi, is this 'solution' already rolled out? Did I mis an update? I still have the (same) issue as descriped above.
Tensuko
commented
1 year ago As you see no reference, nothing is done yet and you would see a new release with changelog.
Spyrootjuh
commented
1 year ago Sorry, was a bit confusing for me with the label 'enhancement'. When I hoof over it it say 'new feature'. My English is not the best :-) But, is the lifting of the shield needed? If it wont move the silage, it (the tractor) will move a bit to the left or right (depandable how wide the tractor vs silo is), Once it is a bit to left/right it is able to move the silage to the back. Currently, due the bumps it get 'stuck'. It is trying to move backward but the wheels are not touching the floor so it is not moving, but because the wheel are not 'blocking', it won't stop and return to the beginning of the silo.
Spyrootjuh
commented
1 year ago 
Another option might be, if we use the tractor, we have 2 options for shifting the shield.
1 is the angle, 2 is lower/upper the shield. In both ways, if 1 is completly up and the 2nd is completly down, you can level the silage in the silo without any problems. Best option is to raise the shield up max and put the angle of the shield down maximum.
Tensuko
commented
1 year ago Check 7.2.0.1 and changelog.
Spyrootjuh
commented
1 year ago 
Testing it now, first 2 trailers emptied and leveled without issues. No bumping, thanks a lot. Will leave Autodrive and Courseplay run for some time and empty the whole field, see if it will get stuck. Will keep you informed.
Using the biggest original silo from the game, is it normal the silage go so far out of the silo?
Somehow the 2nd tractor is not waiting untill the first left the silo.
UPDATE!!! The 2nd tractor is waiting when the 1st tractor is driving backwards into the silo, untill the 1st start unloading, then the 2nd tractor start moving again.
Tensuko
commented
1 year ago Drive trough silos are not made to be use with a shield. As you can imagine, no more drive trough... I suggest you the concrete bunker set and use the U one if you use a shield. https://www.farming-simulator.com/mod.php?lang=de&country=de&mod_id=250819&title=fs2022
Spyrootjuh
commented
1 year ago It is not a drive through, they go backward into the silo. Will test/use U silo the next test.
Spyrootjuh
commented
1 year ago 
Okay, this is probably the issue you mentioned before. The wheels are not touching the ground due the lowered shield. Now it is stuck. But we had the same issue before with the bumping, it also came stuck...
Just thinking... Can a timer be added? That whatever the tractor is doing, after 30 seconds it will go back to starting point or something in this trend?
Spyrootjuh
commented
1 year ago 
I don't know if there is a connection, but the silo work runs fine, every time after a (short) period the shield goes up and drives forward again (3x in the same strip, then it takes the next strip (right, middle ,left)). Until the 1st tractor arrives and is waiting for the 1st trigger point. When a tractor is on hold (waiting until all vehicles are out of the silo) it suddenly seems to get stuck.
Spyrootjuh
commented
1 year ago Ok, I'm pretty sure this is the problem. Whenever there is no tractor near the silo to unload, the tractor's shield will raise in the silo if it 'gets stuck'. When the shield goes up, the tractor goes back to the start and continues. But every time a tractor is standing next to the silo, waiting to unload, the shield no longer rises if the tractor 'gets stuck' in the silo.
Spyrootjuh
commented
1 year ago I will now share a few videos. The 1st video is where the leveling goes well, the shield goes up when the tractor is stuck.
Spyrootjuh
commented
1 year ago In the 2nd movie you can see that it gets stuck, the shield doesn't go up anymore. At the end you see the tractor that wants to unload next to the silo. The whole video takes 5 minutes and I can't share it here. I'll share it with you if you'd like to see it in its entirety.
Steps to reproduce
Actual behavior What i wrote above + screens to visualise the problem. After creating the first bump, iteraction with rest of chaff further in silo is alright. When chaff fills up the leveler, CP worker repeatedly rise and lower the leveler and does leveling properly. Expected behavior Not creating the first bump, since he can get stuck on it. Screenshots
Courseplay version v7.1.2.5
Player on the server 3
Dedicated server or local hosted server Dedicated server.
Map Benz Nordwestmecklenburg v1
Vehicles/ implements involved Xerion 5000 with MES 500 (happening also with MSS 3700) and Stego 485 Pro
Mod Yes, Claas Xerion Tour Edition. (but it's happening also with Fendt 1000 Vario)
Relevant script mods Autodrive on.