Steps to reproduce
CP 7.4.1.3
Use a tractor with the RBM2000 to do a CP bale collection job in Field 71 in Elmcreek
There are more than 24 bales to collect
Actual behavior
After 24 bales loaded, the vehicle stays idle, engine still running, collect arm still unfolded
CP UI shows the job is still in progress (green arrow), in debug mode shows a course to the outside of field
But nothing will ever happen, not even send a message about "Need to Unload"
Expected behavior
Before upgraded to 7.4.1.3
Use the 7.4.0.0 version in modhub
If bale loader is full, it will fold the collect arm, stop the cp job, and raise a "Need to Unload" event to warning you about it
If all bales in field collected before capacity full
Then the vehicle can successfully exit the field, fold the arm, stop engine and report job finished
Steps to reproduce CP 7.4.1.3 Use a tractor with the RBM2000 to do a CP bale collection job in Field 71 in Elmcreek There are more than 24 bales to collect
Actual behavior After 24 bales loaded, the vehicle stays idle, engine still running, collect arm still unfolded CP UI shows the job is still in progress (green arrow), in debug mode shows a course to the outside of field But nothing will ever happen, not even send a message about "Need to Unload"
Expected behavior Before upgraded to 7.4.1.3 Use the 7.4.0.0 version in modhub If bale loader is full, it will fold the collect arm, stop the cp job, and raise a "Need to Unload" event to warning you about it
Screenshots![image](https://github.com/Courseplay/Courseplay_FS22/assets/34699358/b5a8ba4a-927d-426c-ba93-8d29cc774d97)
Courseplay version Version used: 7.4.1.3
Log log.txt
Map Elmcreek
Vehicles/ implements involved Vanilla Massey Ferguson MF 7726S + Anderson RBM2000
Relevant script mods AutoDrive 2.0.1.6