Closed andreasthu closed 2 years ago
Used just today, the roller with CP, and has regularly lowered the tool, before starting to work, as well as other types, such as seeders, plows, etc .. indeed the latest releases, at the end of the work, finally close the tools.
It is important that in the settings, it is set, that the tool must be lowered in advance, and raised late, by default it is set on the contrary, lower late and raise early.
It is important that in the settings, it is set, that the tool must be lowered in advance, and raised late, by default it is set on the contrary, lower late and raise early.
Schrieb ich doch: Haute Beyleron, Feld 44 walzen anheben spät, absenken früh,
Das interessante daran, im Feld44 im süden hat er gestoppt und gewartet, Auch Feld43 nördlich davon (sieht man oben am 3. Bild) hat er lückenlos gewalzt. Da war der kurs ebenfalls, hoch/runter, 1x Vorgewende, beginnend mit den Bahnen, Richtung Ost-West. Da hat er auch keine Lücken am Ende gelassen. Lg Andreas
I confirm still having the same problem on Elmcreek. the driver start to drive in a row having the implement still lowering, making this :( The driver should wait the implement to be fully lowered before continue.
implements are set top be lowered early, and raise late.
Reopen if this is still a problem we made quite a few improvements in the meantime.
Problem besteht immernoch mit 7.0.0.28: 1x rundum Eckig 12,2m AB Hin und Her Anheben spät Absenken früh
dasselbe mit einer Reihe abstand:
also ja, sollte ev noch überarbeitet werden. lg andreas
hast du das mal mit 2 Vorgewenden ausprobiert.. bei der Arbeitsbreite könnte das Sinn machen!
@andreasthu ich kann es nicht reproduzieren. Brauche ein komplettes Log mit Debug.
@pvaiko gerne, hier: log.txt
und der cp-kurs: HB_F38_walzen.txt (als .txt, wegen hochladen)
und hier noch screenshots davon:
und hier noch die einstellungen von cP aus der vehicle.xml) `
` hilft das weiter? lg andreas
ps, wenn in cp7 wieder der ingame course-editor möglich wäre, könnte man ja auf die schnelle die Wend-Endpunkte etwas weiter ins Vorgewende rausziehen und alles wäre super.
I think the problem is to be attributed to that particular tool, I noticed that, it has two precise actions at the beginning of the work, first it lowers it and then it rotates the front rollers, consequently, very likely, the CP sees how to dock it in work position, the first descent, and he leaves for work, but in reality the second phase (very slow) is still to be finished.
@andreasthu that turn speed 17 is the problem.
And that means? Set a slower turn speed? I worked wirh many different machines. In all others, grubber, disk, sowingmachine, mulcher, stonepicker, dresher-combine,.. the traktor stops, lower the tool, and then he beginn to drive forward. Only wirh rhe dalbo roller he dont stop, he drives his way along and lower the tool in drive-by. Lg Andreas
It means it'll work if you set the turn speed to 10 for instance.
There's an underlying bug which only surfaces when you are driving fast.
Danke, nach ersten Tests funktioniert das nun gut. lg andreas
READ FIRST https://github.com/Courseplay/Courseplay_FS22/wiki
Steps to reproduce Claas Axion 870 + Dalbo 1230 Haute Beyleron, Feld 44 walzen anheben spät, absenken früh,
Actual behavior der Traktor mit CP wartet nach der Wende nicht, bis die Walze abgesenkt wurde hier sieht man gut, die 4 Flecken im norden von Feld44 die nicht gewalzt wurden
Expected behavior Der CP traktor sollte stehenbleiben, die Walze senken und dann erst losfahren
Screenshots vor der Wende
anheben:
Wende
wende fast beendet:
aber die walze wird nicht abgesenkt:
jetzt erst, viel zu spät:
Courseplay version Version used: 7.0.0.19 main von main von vor 2 stunden Get the vehicle DirectionNode to measure the distance to the fieldbor… …der. 403f469
Log log.txt
Map Haut Beyleron
Vehicles/ implements involved Claas Axion 870 + Dalbo 1230 no modvehicles
Relevant script mods
lg andreas