Closed pvaiko closed 2 years ago
We are so excited to try this :) Have been thinking this would be an awesome feature.
Wow what a surprise. Great work guys!
I am so excited to try this :). But Why, why am I currently in winter :-D
Great Work! Thank you!
Super, danke Hab es gerade ausprobiert. Funktioniert sehr gut. Lg Andreas
Hallo Bei mir geht es leider nicht, kann ich was zur Fehlerursache beitragen...? Karte: NFM 4fach o.G. Würde Log hier reinstellen, welchen Debugchannels muss ich hier aktivieren...
Hallo Bei mir geht es leider nicht, kann ich was zur Fehlerursache beitragen...? Karte: NFM 4fach o.G. Würde Log hier reinstellen, welchen Debugchannels muss ich hier aktivieren...
Du könntest erst mal sagen, was genau du gemacht hast und wo es hängt.
Hallo
Also, ich habe auf der NFM auf Feld 28 ( Wiese ) mit einem Big M gemäht und mit einer Wickelkombi ( Kuhn FBP 3135 WW -Mod ) dann daraus Silageballen gepresst. Nun versuche ich, mit einem Fendt 313 Vario und einen ( Ursus T-127 - Mod ) die Ballen einzusammeln. Dazu habe ich einen Abfahrkurs von der Wiese zur Gärtnerei mit dortigen Pausepunkt und wieder zurück zur Wiese 28. Jetzt steht das Gespann auf dieser Wiese ( 28 ) mit einstellten "Modus 7" / Kurse beginnen am "Collect bales " CP / Feld 28 und wartet. Habe ich irgentwas noch vergessen...?
Great Work! Thank you!
Dazu habe ich einen Abfahrkurs von der Wiese zur Gärtnerei mit dortigen Pausepunkt und wieder zurück zur Wiese 28.
Kein Wartepunkt, ein hier abladen WP wird benötigt. Ansonsten nur den einen Kurs geladen und keinen Feldkurs oder sonstiges? Ansosnten versuch mal am Kurs zu starten mit nächsten passenden Wegpunkt.
Feldrandkurs nur nötig, wenn die Wiese kein Feld ist und wenn dann sollte man das über den Feldrandscanner mit einer User nummer versehen (in dem Fall würde es ja die 28 sein)
Hallo Geht nicht... Versuch mein Glück jetzt auf Feld 42 , das gepresste Stroh ein zu sammeln... Feldrand wird angezeigt und ist auch geladen, aber er fährt einfach nicht los...
@60erjonny logfile mit channel 7 und 14
Diese Ballen haben kein Node ID, komisch, wie genau hast du die erstellt?
Hallo Mit der LSB 1290 B und den Fendt 313...keine Mod`s... Habe nochmal rum probiert...nach Neustart habe ich eine Tour los fahren lassen können...wenn er aber wieder erneut, zurück auf das Feld kommt bleidt er stehen...
@60erjonny ok, hast du ein Savegame? Und welche Map ist das, NFM sagt mir nix.
Hallo
Nordfriesische Marsch ohne Gräben...2.6...liegt es evtl. daran, das ich die Map etwas bearbeitet habe...? Habe mit den Giants Editor, viele Baume gelöscht...:-) [Uploading savegame1.zip…]()
irgendwas mit dem upload ist schiefgegangen
Hi 2. Versuch... savegame1.zip
Kann nur angucken wenn du eine saubere Link zu diese Map hast. Also ohne Malware und Adware usw.
Nice Improvement...wanna try this one..
Habe nochmal rum probiert...nach Neustart habe ich eine Tour los fahren lassen können...wenn er aber wieder erneut, zurück auf das Feld kommt bleibt er stehen...
Das gleiche Problem habe ich auch
Habe nochmal rum probiert...nach Neustart habe ich eine Tour los fahren lassen können...wenn er aber wieder erneut, zurück auf das Feld kommt bleibt er stehen...
Das gleiche Problem habe ich auch
Es wäre 100mal hilfreicher, wenn wir statt 'habe ich auch' entsprechend hilfreiche infos bekommen könnten. Wie oben geschrieben: logfile mit channel 7 und 14
Tach Habe mal versucht mit den channels 7 und 14 ne Log zu machen Ich habe auch das problem mit dem stehenbleiben. MfG Torsten Log Nf Marsch 4Fach 2.5 Ballen sammeln Courseplay Bug.txt
die komplette log nochmal log.txt
Give it a try with 44.
Just used the new bailing mode 7 to clear a field of 176 bales of hay. Successfully picked up every bale on the field (even a few off the field) and stored them in my hay bale storage shed without a single hiccup. Very impressive. Great job to all the developers! Excellent enhancement to CP. Thanks.
Hallo
Nach einigen Test`s... Kann ich jetzt auch bestätigen, bei mir funktioniert es auch zuverlässig...! Tolle Arbeit und noch dazu für uns, auf die schnelle gefixt...!
Tach Jetzt klappt's auch bei mir. Vielen Dank :) MfG Torsten
Hallo ich weis es passt nicht hier her aber was muss ich machen das der Mod arbeitet?? LG
Naja meinst du jetzt Mod = Modification = CP oder Mode = Modus ? Ich sag mal Modus:
Vielen Dank! Das hab ich gemeint! Mit Auto Drive gehts noch nicht oder?? LG
I used to use a road train with an offset of 2.5m using Easy Auto Lader to automatically pick up all the bales using the same CP course the Header is using, but for some reason, this is now disabled for trucks ? Using the same equipment, all I can do now is mode 10 leveling/compacting. Is this intentional ?
@AUZ001 you still should be able to do that in Mode 6 as before, this is a new mode. If it isn't working now it isn't because of this change.
@Paul2510 does not yet work with AutoDrive, shouldn't be a big deal to make it work.
OK! Many thanks for you work!
Excellent!
This is awesome you guys, but I can't get it to work 100%.
I've made a field of silage bales, and while it mostly picks them up without any problems, the dropping off part is, atlast for me, not working. Fendt Vario 900 with an anderson RBM2000 bale trailer
I use theese bale sheds: https://www.farming-simulator.com/mod.php?lang=en&country=us&mod_id=150708&title=fs2019
If i have a flatbed with strapped on bales, they get picked up by the shed without any problems at all.
Do i need any unload or P-markers? Optionally any known good sheds?
ps. Devs: you rock
@djnekkid - I use the same bale sheds. You need to put an unload mark (the icon that looks like a dump truck in the course generator) where you need to unload in front of the shed as part of your unload course from the field. Hope this helps.
Try This Mode on v6.03.00044 and it is work nicely, just set course for unload and no need to set field course... Thank's to Devs for all Effort and hard work..
@djnekkid When I find some time I will make a How to Video (at least visual) like I did with Mode3. But it takes some time like prepare everything and stuff...
@Tensuko : i can possibly do that myself if u want me to. I've not yet tested this feature with the 'unload', but i assume it works as @CaptSully saies :) Im currently building a Dyson Sphere :)
bei mir funktionierte der neue Modus nicht, bis ich den lsfm stätionäre Presse mod von Farmer Andy als Übeltäter ausfindig gemacht habe. Presse verkauft jetzt läuft alles prima. Was mir noch fehlen würde ist, das verbundene Felder erkannt werden. Hier sammelt er bei mir nur das genannte Feld ein.
@Autobosl ...versuche mal bei einen neu erstellten Feld den neu gescannten Feldrandkurs eine neue Nummer zu vergeben...dann sollte es gehen...
Question: It appears that the location of the bales is mapped out at the start (I threw a runaway bale back onto the field after starting the collector and this bale was skipped). So, does this mean we can not run 2 bale collectors on the same field at the same time? (I guess collisions also may be a problem).
Field is scanned at start, when returning from the unload course or when we miss a bale (drove to the bale but did not pick up anything).
And yes, only one bale collector per field is allowed, currently there's nothing in the code to share the bales between multiple drivers. Also, we don't remember which bales we already collected, so if you wanted to put the collected bales on the same field that would also be a problem.
May add this latter one but sure don't want to open a can of worms with multiple drivers on the same field.
@Autobosl Zusammen gelegte Felder immer mit dem Feldrandscanner einmal Scannen und einer Nummer zuweisen, so dass diesers Feld als (User) auftaucht. Dann geht es.
Ok Danke. Dann liegt der Fehler bei mir. Feldkurs ist eigentlich angelegt. Da der Mäher, Wender und Schwader ja auch auf dem verbundenen Feld arbeiten. Werde das heute nochmal testen.
Just added a new mode for collecting bales, replacing the old, unused mode 7. With this mode you don't need a fieldwork course to collect bales from a field with a bale loader, it'll scan the field for bales and automatically load them.
You still need an unload course (just like when using a bale loader in mode 6), to unload the bales at a sell point or anywhere else.
Select Mode 7, select a field, then 'Collect bales'