trying to find pin out for creality 4.2.7. retailer claims it is compatible with btt tft35 e3.

[cdhunter1010]

trying to find A pin out for the creality 4.2.7 board. Comgrow claimed it was compatible not seeing any header for it.

[jmartens2]

Hopefully I’m not too late. could I ask the same question? I’m really interested to find the serial out for a touchscreen board

[cdhunter1010]

This board doesn't support touch screens. I couldn't get a response from Creality. I don't think they plan for this to happen with this particular board. I tested this board for a third party other then the lack of touch screen support it performed very well.

On Mon, Mar 29, 2021 at 6:34 PM jmartens2 @.***> wrote:

Hopefully I’m not too late. could I ask the same question? I’m really interested to find the serial out for a touchscreen board

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Creality3DPrinting/Ender-3/issues/64#issuecomment-809794238, or unsubscribe https://github.com/notifications/unsubscribe-auth/AL2S7KATEHM23ZIQEXEV2DDTGEFBBANCNFSM4UV4BVGA .

[jmartens2]

I love the board that’s why I don’t wanna change to a different manufacturer. But I would also like to get rid of the encoder knob. It’s 2021, for heavens sake! Thank you for the reply. Have a great week!

Sent from my iPhone

On Mar 30, 2021, at 4:28 PM, cdhunter1010 @.***> wrote:

 This board doesn't support touch screens. I couldn't get a response from Creality. I don't think they plan for this to happen with this particular board. I tested this board for a third party other then the lack of touch screen support it performed very well.

On Mon, Mar 29, 2021 at 6:34 PM jmartens2 @.***> wrote:

Hopefully I’m not too late. could I ask the same question? I’m really interested to find the serial out for a touchscreen board

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Creality3DPrinting/Ender-3/issues/64#issuecomment-809794238, or unsubscribe https://github.com/notifications/unsubscribe-auth/AL2S7KATEHM23ZIQEXEV2DDTGEFBBANCNFSM4UV4BVGA .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

[cdhunter1010]

Try octoprint gives wifi ability to the printer and can be customized with plug-ins to better suit your needs

On Tue., Mar. 30, 2021, 5:01 p.m. jmartens2, @.***> wrote:

I love the board that’s why I don’t wanna change to a different manufacturer. But I would also like to get rid of the encoder knob. It’s 2021, for heavens sake! Thank you for the reply. Have a great week!

Sent from my iPhone

On Mar 30, 2021, at 4:28 PM, cdhunter1010 @.***> wrote:

 This board doesn't support touch screens. I couldn't get a response from Creality. I don't think they plan for this to happen with this particular board. I tested this board for a third party other then the lack of touch screen support it performed very well.

On Mon, Mar 29, 2021 at 6:34 PM jmartens2 @.***> wrote:

Hopefully I’m not too late. could I ask the same question? I’m really interested to find the serial out for a touchscreen board

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/Creality3DPrinting/Ender-3/issues/64#issuecomment-809794238 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AL2S7KATEHM23ZIQEXEV2DDTGEFBBANCNFSM4UV4BVGA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Creality3DPrinting/Ender-3/issues/64#issuecomment-810606883, or unsubscribe https://github.com/notifications/unsubscribe-auth/AL2S7KGWANQQCWO56MP5UKLTGJC45ANCNFSM4UV4BVGA .

[jmartens2]

Info taken. I’m not sure I’m ready for that yet

Sent from my iPhone

On Mar 30, 2021, at 5:05 PM, cdhunter1010 @.***> wrote:

 Try octoprint gives wifi ability to the printer and can be customized with plug-ins to better suit your needs

On Tue., Mar. 30, 2021, 5:01 p.m. jmartens2, @.***> wrote:

I love the board that’s why I don’t wanna change to a different manufacturer. But I would also like to get rid of the encoder knob. It’s 2021, for heavens sake! Thank you for the reply. Have a great week!

Sent from my iPhone

On Mar 30, 2021, at 4:28 PM, cdhunter1010 @.***> wrote:

 This board doesn't support touch screens. I couldn't get a response from Creality. I don't think they plan for this to happen with this particular board. I tested this board for a third party other then the lack of touch screen support it performed very well.

On Mon, Mar 29, 2021 at 6:34 PM jmartens2 @.***> wrote:

Hopefully I’m not too late. could I ask the same question? I’m really interested to find the serial out for a touchscreen board

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/Creality3DPrinting/Ender-3/issues/64#issuecomment-809794238 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AL2S7KATEHM23ZIQEXEV2DDTGEFBBANCNFSM4UV4BVGA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Creality3DPrinting/Ender-3/issues/64#issuecomment-810606883, or unsubscribe https://github.com/notifications/unsubscribe-auth/AL2S7KGWANQQCWO56MP5UKLTGJC45ANCNFSM4UV4BVGA .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

[jmartens2]

Thanks

Sent from my iPhone

On Mar 30, 2021, at 5:05 PM, cdhunter1010 @.***> wrote:

 Try octoprint gives wifi ability to the printer and can be customized with plug-ins to better suit your needs

On Tue., Mar. 30, 2021, 5:01 p.m. jmartens2, @.***> wrote:

I love the board that’s why I don’t wanna change to a different manufacturer. But I would also like to get rid of the encoder knob. It’s 2021, for heavens sake! Thank you for the reply. Have a great week!

Sent from my iPhone

On Mar 30, 2021, at 4:28 PM, cdhunter1010 @.***> wrote:

 This board doesn't support touch screens. I couldn't get a response from Creality. I don't think they plan for this to happen with this particular board. I tested this board for a third party other then the lack of touch screen support it performed very well.

On Mon, Mar 29, 2021 at 6:34 PM jmartens2 @.***> wrote:

Hopefully I’m not too late. could I ask the same question? I’m really interested to find the serial out for a touchscreen board

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/Creality3DPrinting/Ender-3/issues/64#issuecomment-809794238 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AL2S7KATEHM23ZIQEXEV2DDTGEFBBANCNFSM4UV4BVGA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Creality3DPrinting/Ender-3/issues/64#issuecomment-810606883, or unsubscribe https://github.com/notifications/unsubscribe-auth/AL2S7KGWANQQCWO56MP5UKLTGJC45ANCNFSM4UV4BVGA .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

[ellensp]

[jmartens2]

I’m sorry but I only speak English.

[ellensp]

The Russian is quite irrelevant, you don't need to it under stand the pin names.

[jmartens2]

That’s very true. Thank you.