Hammerfest
commented
6 months ago Closing the issue, it does it in other slicers as well (for the supports at least, a different slicer didnt have the infill issue Creality Print has).
Closed Hammerfest closed 6 months ago
Hammerfest
commented
6 months ago Closing the issue, it does it in other slicers as well (for the supports at least, a different slicer didnt have the infill issue Creality Print has).
I have 2 issues, one I will post later and could be a firmware issue, or could be a slicer issue, not knowledgeable enough to know.
Total novice to 3D printing but have plenty of friends and family who are not novice's but none of them have the K1 Max like I do or use Creality Print/Slicer.
My issue could be present across other slicers, if that's the case please let me know, if there's a setting I am missing, again, please let me know as I have not found anything.
As the title says, I have a few different objects which print in an L shaped layout, for whatever reason the infill, and support (the problem really for me right now) print in different orientations/layouts which causes issues and I need it to STOP.
In the included screenshot you can see the supports on the left side and the supports on the right side, they SHOULD be the same orientation/layout, but they are not and its driving me insane (the infill does this same nonsense as well).