search

CrealityOfficial / CrealityPrint

GNU General Public License v3.0
167 stars 24 forks source link

Angle of Slope Slice #67

Closed Y13Lab closed 2 weeks ago

Y13Lab commented 4 months ago

When Angle of Slope Slice is enabled, the extruder rises up after each layer. 1 I have tried all the available versions of CrealityPrint.

After much adjustment I got an acceptable result, but it’s like a hack. -enable retract when changing layers -turn on the z rise during retract and most importantly, I set the lifting height = 0.00 3 It can be seen that sometimes the z axis rises.

When retraction wipe is enabled, long movements to the origin. Снимок

ducklingasa commented 1 month ago

Hi Creality Team,

I also want to confirm that I have the same problem as @Y13Lab, although I could make the "Angle of Slope Slice" work with his suggestion, however, the print head does long movements to the origin between layers, which seems unnecessary and results in poor layer adhesion.

Could you fix this, please?

Y13Lab commented 1 month ago

This feature has been removed in Creality Print 5.0.0.