Open junkjunker opened 5 months ago
I found that the pins changed for the display, and added this to the Klipper printer.cfg:
[display] # Use stock Ender 3 Pro display lcd_type: st7920 cs_pin: PB12 sclk_pin: PB13 sid_pin: PB15 encoder_pins: ^PB14, ^PA2 click_pin: ^!PB2
could you share your klipper firmware and printer.cfg with me so I can do some playing around, going to try to get it working for the sonicpad
I found that the pins changed for the display, and added this to the Klipper printer.cfg:
[display] # Use stock Ender 3 Pro display lcd_type: st7920 cs_pin: PB12 sclk_pin: PB13 sid_pin: PB15 encoder_pins: ^PB14, ^PA2 click_pin: ^!PB2