Closed bauer1980 closed 4 years ago
Issue solved: I didn't connect GND --> GND from EVSE DIN to the ESP8266
sorry, for the late reply. It looks like there is no connection to EVSE DIN. It also should show you the "Modbus error" on the "EVSE Control" Page.
Hello, i can access and change evse wifi settings, i can also see evse register on "show device status" - but i have the problem that i cannot change the register values. If i set them they don't change. Also after restart they are not changed. I have on register 2001 following value: 25973, i want to change it to 1 but it does not work. I always get modbus error on the main page. I checked all wire connection, i cannot find the problem. Also if i put the AN pin 5 times to 0 within the first 3 seconds of start i don't get anything changed.![image](https://user-images.githubusercontent.com/14095201/76734814-fe0e6180-6763-11ea-96a4-18ef5169deb8.gif)