Open Sturwandan opened 4 years ago
To note: This also happens to XP-Pen CT640 but blinks when sudo uclogic-probe 3 13 | uclogic-decode
is executed. Same error as above.
sudo uclogic-probe 3 13 | uclogic-decode
output:
| Manufacturer: UGTABLET
| Product: 6 inch PenTablet
64 | Params block #1: ??????
| Max X: 31998
| Max Y: 19994
| Max pressure: 8191
| Resolution: 5080
|
79 | Internal model: ???????
Failed to get string descriptor 0xC8: Input/Output Error
7b | Buttons status: HK On
sudo usbhid-dump -m 28bd:0931 -e stream
output:
Starting dumping interrupt transfer stream
with 1 minute timeout.
003:013:000:Device was disconnected
003:013:001:Device was disconnected
003:013:002:Device was disconnected
No more interfaces to dump
003:013:002:Failed to release: No such device (it may have been disconnected)
003:013:002:Failed to attach to the kernel driver: No such device (it may have been disconnected)
003:013:001:Failed to release: No such device (it may have been disconnected)
003:013:001:Failed to attach to the kernel driver: No such device (it may have been disconnected)
003:013:000:Failed to release: No such device (it may have been disconnected)
003:013:000:Failed to attach to the kernel driver: No such device (it may have been disconnected)
lsusb
output:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 1919:1919 USB Receiver USB Receiver
Bus 003 Device 003: ID 04f2:b725 Chicony Electronics Co., Ltd Integrated Camera
Bus 003 Device 005: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 003 Device 015: ID 28bd:0931 XP-Pen 6 inch PenTablet
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
This issue is mentioned in https://github.com/DIGImend/digimend-kernel-drivers/issues/388
Once uclogic-probe tries to get 0xC8 descriptor from XP-PEN G430S_B, it makes the device change USB id to 28bd:1227 and stop working. The device LED is lit up constantly after that and it doesn't send anything even when the pen is approaching.