search

DJHartley / independence

Automatically exported from code.google.com/p/independence
1 stars 0 forks source link

Upgrading to 1.1.2 - Phone and sms functions lost, everything else ok #320

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1. Unlock iPhone 1.0.2 OOTB with anysim 1.0. (Activation,jail,SHH w/ iNd
2. Revirginize (Elite method), unlock with anysim 1.1, do preupgrade then 
upgrade to 1.1.1. Activate, jail, SSH w/ iNd 1.3.1.
3. Do preupgrade (if available, I've tried with or without), upgrade 
following iNd 1.3 instructions to 1.1.2, unlock with anysim 1.2 (from iNd).
(4.) I've tried the same again but have reversed anysim 1.1 with onesim as 
well.

What is the expected output? What do you see instead?

1.1.2 works fine, but sms and phone apps crash instantly and never work. 
Carrier is shown and everything else is functional. Anysim 1.2u says it 
has unlocked successfully.

What version of the product are you using? On what operating system?

iNdependence 1.3.1, iTunes 7.5, Leopard 10.5.1

(No other mods to the phone, and have never used anything other than 
iNdependence and the Elite virginizing method)

Please provide any additional information below.

I have tried numerous times. Each time I downgrade baseband, virginize and 
follow all instructions to the letter. No third party apps or other stuff 
installed.

Original issue reported on code.google.com by u4354...@anu.edu.au on 18 Dec 2007 at 1:30

GoogleCodeExporter commented 8 years ago 
same experience here. I don't even want to try again.
Not sure if it's because we didn't do the oktoprep patch?

Original comment by josh....@gmail.com on 18 Dec 2007 at 2:12

GoogleCodeExporter commented 8 years ago 
I don't think Oktoprep is needed as iNdependence is a fairly comprehensive 
piece of 
software and the preupgrade is probably the equivalent.

I did forget to mention I'm in Australia, and a previous post refers to it 
being an 
international dialling format or something to that effect. I am yet to see any 
straightforward fixes, but assuming this (or something similar) is the issue, 
would 
appreciate any comments. It may be something else so wait and see.

Original comment by u4354...@anu.edu.au on 18 Dec 2007 at 10:42

GoogleCodeExporter commented 8 years ago 
Hey, I had the same problem yesterday and was pretty worried, but I got it all
working again.
I added App Tap INSTALLER via iNdepencence, and was able to load iWorld, which 
fixes
it up.

I don't think INSTALLER is available as a separate download, but if you need it,
respond here.  I know how frustrating it is to feel all alone in this!

It works, I'm in Australia and happily using 1.1.2 on my iPhone.  Works great!

Hope this helps.

Jim

Original comment by jim...@gmail.com on 19 Dec 2007 at 1:02

GoogleCodeExporter commented 8 years ago 
Jimhbi,
Thanks HEAPS for your post - I downloaded installer on 1.1.1 then iWorld, 
copied it to Macbook HD then 
installed 1.1.2, installed and ran iWorld and everything is devine. Not an 
Installer fan so very pleased with the 
result. Issue now solved. I'm precious about just using iNdependence rather 
than mixing hacking methods, so 
this was a great way of doing things. Thanks again for pointing out iWorld.

C.

PS... phone number display for receipt of texts has now changed to name, so 
this method repairs a few 
glitches for Aussies brilliantly.

Original comment by u4354...@anu.edu.au on 19 Dec 2007 at 1:10

GoogleCodeExporter commented 8 years ago 
I have AppTapp Installer, the Get Info shows it was created on 9/8/07 
(109.6MB), is this the latest version.  I also 
need to download iWorld but have been unable to find it, can anyone point me to 
a link to get it?

Original comment by SDTeach...@gmail.com on 19 Dec 2007 at 1:14

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
Please excuse my ignorance but when you say "run installer" do you mean run 
AppTapp Installer from my 
computer desktop or load it into my iPhone using iNdependence and then running 
it?

Original comment by SDTeach...@gmail.com on 19 Dec 2007 at 5:29

GoogleCodeExporter commented 8 years ago 
Load it onto your iPhone (I used iNdependence/Customize to do this) and run it 
from the phone.  This allows you 
to download apps directly to the phone and not need a computer.  Also gives you 
access to cool stuff that you 
can only use via installer (most importantly iWorld!)

Jim

Original comment by jim...@gmail.com on 19 Dec 2007 at 8:48

GoogleCodeExporter commented 8 years ago 
Hi Jim,

When I try to install AppTapp Installer 3.1 onto my iPhone using 
iNdenpendence/customize, I get the 
message "Failed, root password is incorrect."  I checked the IP address and it 
is correct and I'm using the 
original password "dottie" which I've never changed.  FYI, my iPhone is at 
1.1.2 (upgraded) and I'm using Mac 
10.5.1.

Any suggestions as to what I'm doing wrong?

Thanks for your kind assistance

Steven

Original comment by SDTeach...@gmail.com on 20 Dec 2007 at 12:11

GoogleCodeExporter commented 8 years ago 
Guys,

I am having same problem here... I live in Colombia... can anyone point me out 
where can I download both 
iWorld and AppTapp Installer?

thanks
Juan

Original comment by jot...@gmail.com on 30 Dec 2007 at 2:05

GoogleCodeExporter commented 8 years ago 
I have managed to install apptap installer, I went into tweaks but see no 
iWorld app under any of the folders... 
how do I find this??

Original comment by jot...@gmail.com on 30 Dec 2007 at 3:48

GoogleCodeExporter commented 8 years ago 
Hi, can anyone tel me where can i get the apptap?

Original comment by cdis...@gmail.com on 3 Jan 2008 at 7:27